jeffquitney
patreon
Armored Bulletproof Vest Testing in Korea 1952 US Army; from Pictorial Report No. 1; The Big Picture TV-202
🕑 Added 2021-02-08 21:00:10 +0000 UTCmore at http://quickfound.net/
'Round-up of stories of unusual interest to many viewers. This is something new in THE BIG PICTURE series and we expect it to gain very favorable reaction. The first Report covers... testing of the armored vest in actual combat...'
Originally a public domain film from the National Archives, slightly cropped to remove uneven edges, with the aspect ratio corrected, and one-pass brightness-contrast-color correction & mild video noise reduction applied.
The soundtrack was also processed with volume normalization, noise reduction, clipping reduction, and/or equalization (the resulting sound, though not perfect, is far less noisy than the original).
https://en.wikipedia.org/wiki/Bulletproof_vest
Wikipedia license: http://creativecommons.org/licenses/by-sa/3.0/
A ballistic vest or bullet-resistant vest, often called a bulletproof vest, is an item of body armor that helps absorb the impact and reduce or stop penetration to the torso from firearm-fired projectiles and shrapnel from explosions.
The vest may come in a soft form, as worn by many police officers, prison guards, security guards and some private citizens (e.g. government officials, V.I.P. persons). Prison guards and police may wear soft vests designed to resist stabbing attacks, using metallic or para-aramid components...
The combatants of World War I started the war without any attempt at providing the soldiers with body armor...
The United States developed several types of body armor, including the chrome nickel steel Brewster Body Shield, which consisted of a breastplate and a headpiece and could withstand Lewis Gun bullets at 2,700 ft/s (820 m/s), but was clumsy and heavy at 40 lb (18 kg). A scaled waistcoat of overlapping steel scales fixed to a leather lining was also designed; this armor weighed 11 lb (5.0 kg), fit close to the body, and was considered more comfortable.
During the late 1920s through the early 1930s, gunmen from criminal gangs in the United States began wearing less-expensive vests made from thick layers of cotton padding and cloth. These early vests could absorb the impact of handgun rounds... traveling at speeds of up to 300 m/s (980 ft/s). To overcome these vests, law enforcement agents began using the newer and more powerful .38 Super, and later the .357 Magnum cartridge...
...Near the middle of 1944, development of infantry body armor in the United States restarted. Several vests were produced for the US military, including but not limited to the T34, the T39, the T62E1, and the M12. The United States developed a vest using Doron Plate, a fiberglass-based laminate. These vests were first used in the Battle of Okinawa in 1945...
During the Korean War several new vests were produced for the United States military, including the M-1951, which made use of fibre-reinforced plastic or aluminium segments woven into a nylon vest. These vests represented "a vast improvement on weight, but the armor failed to stop bullets and fragments very successfully," although officially they were claimed to be able to stop 7.62×25mm Tokarev pistol rounds at the muzzle. Such vests equipped with Doron Plate have, in informal testing, defeated .45 ACP handgun ammunition. Developed by Natick Laboratories and introduced in 1967, T65-2 plate carriers were the first vests designed to hold hard ceramic plates, making them capable of stopping 7 mm rifle rounds.
These "Chicken Plates" were made of either boron carbide, silicon carbide, or aluminium oxide. They were issued to the crew of low-flying aircraft, such as the UH-1 and UC-123, during the Vietnam War.
In 1969, American Body Armor was founded and began to produce a patented combination of quilted nylon faced with multiple steel plates. This armor configuration was marketed to American law enforcement agencies by Smith & Wesson under the trade name "Barrier Vest." The Barrier Vest was the first police vest to gain wide use during high threat police operations.
In 1971, research chemist Stephanie Kwolek discovered a liquid crystalline polymer solution. Its exceptional strength and stiffness led to the invention of Kevlar, a synthetic fibre, woven into a fabric and layered, that, by weight, has five times the tensile strength of steel. In the mid-1970s, DuPont, the company which employed Kwolek, introduced Kevlar...
In 1975 Richard A. Armellino, the founder of American Body Armor, marketed an all Kevlar vest called the K-15, consisting of 15 layers of Kevlar that also included a 5" × 8" ballistic steel "Shok Plate" positioned vertically over the heart and was issued US Patent #3,971,072 for this innovation...
In 1976, Richard Davis, founder of Second Chance Body Armor, designed the company's first all-Kevlar vest, the Model Y. The lightweight, able vest industry was launched and a new form of daily protection for the modern police officer was quickly adapted...
