cinderwing3d
patreon
Tiny Horse! [ARCHIVED]
🕑 Added 2025-04-06 19:00:05 +0000 UTCThis was a APRIL 2025 Design and has been Archived!
If you were subscribed in April you will receive an email from MyMiniFactory within the week to access the archived files from that month.
If you are starting your Subscription in MAY 2025, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the MAY Models will be in the MAY 2025 posts tab as they come out over the month!
https://www.patreon.com/c/cinderwing3d/collections
Hi Cinders!
Thank you all for being patient with this design! I am so excited to release this Tiny Horse to you all!
Like the previous Tiny Deer design, the Tiny Horse neck prints in the down position and snaps up into place once printed. This allows for articulated head movement, making it extremely fun to play with! This design was tested between the standard 60-100%, and the "Snap-in Neck" was design for those sizes. This larger the print the harder that neck snap is. Therefore, I am working on a larger print design where the neck is easier to snap in for files over 100% size - I will let you all know when that comes out!
I wanted this design to have some really awesome paint jobs for all those horse lovers out there so I've included FIVE different .3MFs! I hope you all enjoy this print! I'd love to see your pictures in the Discord chat!
-Tracy
----------------------------------------------------
FILAMENT and Tools:
https://www.amazon.com/shop/cinderwing3d
EYES: Sunlu white and black
Appaloosa: Stronghero3D Bronze, Sunlu black
Paint: Ziro wood grain matte, Elegoo Beige
Clydesdale: Elegoo Silk Bronze, Sunlu black
Base Horse Feather Foot: CC3D Marble, Sunlu black
Base Horse: Sunlu wood color, Sunlu black
-----------------------------------------
All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!
Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
6 Design Drops - April 2025 Models: HERE
April Fool's Whatchamahoozit - RELEASED - EXCLUSIVE
(1) .3MF Color File
Tiny Horse - RELEASED
Tiny Horse
Tiny Horse Feather Feet
(5) .3MF Color Files
Secret Design
Secret Design
Secret Design
Secret Design
-------------------------------------------------------
PLEASE READ
Please remember, with Active $10 Commercial License Tier Support, you have a Commercial License to legally sell the 3D PRINTS ( Not Files ) created from any of my Designs on any platform EXCLUDING Temu, Alibaba, and any other drop-shipping platforms or services. Example: Amazon listings cannot be supplied by a drop-shipping company. These such violations will be taken down and membership and Commercial License will be revoked.
This License is for YOU to print and sell, not for a factory to print on demand for you. Our goal is to support small businesses.
NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
---> Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Link to the PUBLIC MODELS and Exclusives Full Index List:
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
![Tiny Horse! [ARCHIVED]](https://img5.leakoo.com/storage/3/sl/mi/93d9f0-019e9051-5a52-786d-859f-1d16c537302f.png)
![Tiny Horse! [ARCHIVED]](https://img5.leakoo.com/storage/11/jw/lg/93d9f0-019e9051-5a57-7412-953f-062626e9e3eb.png)
![Tiny Horse! [ARCHIVED]](https://img5.leakoo.com/storage/1/lt/dx/93d9f0-019e9051-5a5e-70aa-ae9a-dff255a930d5.png)
![Tiny Horse! [ARCHIVED]](https://img10.leakoo.com/storage/3/fv/vs/93d9f0-019e9051-5a63-7765-9476-fd3b1141a601.png)
![Tiny Horse! [ARCHIVED]](https://img10.leakoo.com/storage/1/mw/nb/93d9f0-019e9051-5a64-79c2-80bd-bebae7d73a55.png)
![Tiny Horse! [ARCHIVED]](https://img10.leakoo.com/storage/10/zg/jp/93d9f0-019e9051-5a66-78d8-971e-9d0534f133ed.png)
![Tiny Horse! [ARCHIVED]](https://img5.leakoo.com/storage/12/zj/kk/93d9f0-019e9051-5a67-731a-9428-b0f3340b645d.png)
![Tiny Horse! [ARCHIVED]](https://img5.leakoo.com/storage/5/hd/yq/93d9f0-019e9051-5a6a-73ae-b690-f6c9fc3ebf1b.png)
![Tiny Horse! [ARCHIVED]](https://img10.leakoo.com/storage/2/ds/gx/93d9f0-019e9051-5a6f-7153-a857-43b9a6584129.png)
![Tiny Horse! [ARCHIVED]](https://img10.leakoo.com/storage/7/pb/jy/93d9f0-019e9051-5a6f-7621-a510-e8fcaedbb4d8.png)
Comments
Jocelyn Kessinger
I would also love a unicorn version of this :)
Stephen Tate
these are so cute but would love a unicorn version! we have a toddler very into rainbow unicorns
Keith Kraemer
I second the comment from above! I would LOVE to see a unicorn version of these!
Ray Christenson
was wonder the same thing
Gerhard Grobler
Thank you for the JUMBO edit. I have decapitated both a tiny horse and a cat dragon so far. On my slow printers, that is 2 days lost.
Rachel Georgandas
does the jumbo horse have a colored profile?
Öpfusirup
yep, I know what else will be in the easter basket for my godchild. so sweet, thank you
Michelle T
My Grandson will love these as well
Shelly Paine
I love these!! Had to make a horse ranch lol.
Nicole
Every single time I see that there is a new print for each moth I jump with joy
Nicole
Love it
Tristan Hughes
What about Unicorn versions? With and Without Wings
Angela Farnsworth
Perfect birthday gift for me! :D haha so adorable!
Gerhard Grobler
What a snapping sound as it clips in! I though I had broken it. But it is done.
Gerhard Grobler
1st print off the printer. Not sure how far the neck is supposed to fold back. But the plain PLA print took only 2H13 on my E2V3SE. Afraid to de cappa my horse. But everyone agrees it is adorable. Will see about down scaling and up scaling.
Tony
i just printed some at 44% and they still articulate so you can scale these to fit like 40 on a plate as long as your printer is set and prepped properly
Ohart's 3D Printing
Love!!!
Tristan Hughes
Sorry, I'm lost what can these be scaled down to? I was looking at trying to do 6 on a plate. Do you think that's possible?
Kristin Coker
Could you later on add wings and a horn to these lil guys wink wink? <3
Erich Burch
me too. spiders sell like crazy and they cost so little.
Stephanie Campbell
Love this type of thing. I sell the crap out of minis and this one is so adorable.
Tracy Francis
All models are tested! We just had someone post a 44% in Discord actually haha
Alejandro Wille
Usually tiny is tested to 45%, is that true here too? The email seems to indicate it has not been tested.
Jen627
My daughter's going to love this. I'll have o see if I can keep it a secert and print one for her easter basket!
Christopher Sincox
love the horses. this was something i would never of thought of. could we get highland cows now?
Steve
Looking forward to more farm animals!!!
Jordin Hitt
Samee!!
Jordin Hitt
Omg they're adorable!!
Jazzy Bee
This is so great! I’ve had so many people ask me for horses. Thank you!
JMac Creations
Super cute
Tracy Francis
You can just re-color it! Use the fill tool with edge detection off!
3D Sunbeam
Oh Wow Yes! These are fantastic, plus all those paint jobs. Awesome work, THANK YOU!
Earl Brim
Is there any way to have the 2 color base with black mane with brown everywhere else without changing the eye? For some reason the mane, tail and feet are white by default when I open the file. When I switch white to black, the eye looks creepy. The photo shows what I was looking to replicate. Thanks in advance.
Stephanie Kelbough
I am so excited about this!!! Woohoooo
SerialKreations
omg yes! these are awesome! thank you for so many color options!!!
Brittany Timms
My students are going to freak! Thank you! ❤️
Silvyr
I can’t wait to try these! ❤️ thank you! Thank you! Thank you!
Becky Hayes
I have a solid color printing now!
Grumpy Vet 3d Printing!
Let's see how small I can get them. Gotta be between 40-50mm to go in my mini tubs
Donald Holloway
Best tiny horse files I've seen. This is why we all love you so so much!
Ashley Florack
Omg this is incredible!!
Katherine T
Squeeee!!! These are the cutest tinies ever - thank you!!!
Maddog M
So cute
Charity
So excited for this one!! Hoping for a mod to turn it into a unicorn too! (crossed fingers!)
Printables3dLab
Cute
Rachael M
and unicorn!
SilverWitch
This one is going to be super popular!
Karli Kehres
Oh my goodness!!!!!
StarlightFoundry
!!! Alicorn coming soon??????? 👀👀👀👀👀
Dozer Dog Designs
Oh. MY. LITTLE PONY! I am so excited about this!!
Tiffany Blassingill
Ahhhhhh!!! So cute 😍
