cinderwing3d
patreon
Tiny Peacock! [ARCHIVED]
🕑 Added 2025-03-28 19:00:10 +0000 UTCThis was a MARCH 2025 Design and has been Archived!
If you were subscribed in March you will receive an email from MyMiniFactory within the week to access the archived files from that month.
If you are starting your Subscription in MARCH 2025, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the MARCH Models will be in the MARCH 2025 posts tab as they come out over the month!
https://www.patreon.com/c/cinderwing3d/collections
Hi Cinders!
Who wants a Tiny Peacock!?
For the last design of the month I'm releasing this adorable Peacock! It's a quick print for single color, but because of all the colors and swaps, a 4-color print does take a quite a while. These were quite tedious to paint so huge THANK YOU goes out to the following people for taking the time to do so!
2 Color .3MF included thanks to Cinderwing3D Tester ELI!
4 Color .3MF included thanks to Sledge Painter!
As most Cinderwing3D "Tiny" Designs, the original size is usually pretty big. The "TINY" comes in where they have been designed with bigger links to be STRONGER and capable of printing at smaller, ACTUAL TINY sizes. :) We test between 100-60% for strength and articulation. This design has been tested between 100%-20% although 20% is fragile!
I hope this design is fun for you all and that you've enjoyed the 7 releases this month! Again thank you for being understanding on the 2 designs I had to postpone until next month; they'll be coming out early next month!
-Tracy
----------------------------------------------------
FILAMENT and Tools:
https://www.amazon.com/shop/cinderwing3d
single color tri: CnaCaiv3D blue green purple
Single color purple: Flashforge Chameleon Blue Pink
4 Color: Flashforge Chameleon Blue Pink, Sunlu white, Flashforge Chameleon yellow green,
-----------------------------------------
All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!
Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
7 Design Drops - March 2025 Models: HERE
Baby Fae Wolf Dragons - EXCLUSIVE - RELEASED
Closed Pattern Wings Version
Open Pattern Wings Version
(4) .3MF Color Files
TINY Flying Serpent - RELEASED
(1) .3MF Color File
Crystal Snake - RELEASED
(2) .3MF Color Files
Egg Spider - RLEASED
(2) .3MF Color Files (Easter and Robin)
Tiny Bunny Dragon - RELEASED
(1) .3MF Color File
Cat Dragon - RELEASED
(2) .3MF Color Files
Tiny Peacock - RELEASED
(2) .3MF Color Files
-------------------------------------------------------
PLEASE READ
Please remember, with Active $10 Commercial License Tier Support, you have a Commercial License to legally sell the 3D PRINTS ( Not Files ) created from any of my Designs on any platform EXCLUDING Temu, Alibaba, and any other drop-shipping platforms or services. Example: Amazon listings cannot be supplied by a drop-shipping company. These such violations will be taken down and membership and Commercial License will be revoked.
This License is for YOU to print and sell, not for a factory to print on demand for you. Our goal is to support small businesses.
NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
---> Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Link to the PUBLIC MODELS and Exclusives Full Index List:
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
![Tiny Peacock! [ARCHIVED]](https://img5.leakoo.com/storage/8/hp/ik/93d9f0-019e9051-5aa0-7563-9076-042f7cb6768d.png)
![Tiny Peacock! [ARCHIVED]](https://img5.leakoo.com/storage/4/zy/lw/93d9f0-019e9051-5aa5-7396-a5b5-15579ce014c0.png)
![Tiny Peacock! [ARCHIVED]](https://img5.leakoo.com/storage/2/wz/gf/93d9f0-019e9051-5aa5-7ce0-b78f-cc4e59765cfb.png)
![Tiny Peacock! [ARCHIVED]](https://img10.leakoo.com/storage/6/zb/zn/93d9f0-019e9051-5aa7-7ed2-8d55-bae089673ee3.png)
![Tiny Peacock! [ARCHIVED]](https://img10.leakoo.com/storage/4/dg/vf/93d9f0-019e9051-5aac-791e-9619-c166630bd1bb.png)
![Tiny Peacock! [ARCHIVED]](https://img5.leakoo.com/storage/9/bx/og/93d9f0-019e9051-5aae-7236-b645-c86933cd426c.png)
![Tiny Peacock! [ARCHIVED]](https://img10.leakoo.com/storage/2/bf/yg/93d9f0-019e9051-5aaf-78f7-8909-278367204333.png)
![Tiny Peacock! [ARCHIVED]](https://img10.leakoo.com/storage/5/oj/jl/93d9f0-019e9051-5ab5-7038-a90c-a1a86013f47f.png)
Comments
LoveBugDesigns.us
I put off making these as the print time was crazy long, but I scaled them to fit 15 on the board, and after nearly 3 days, I had sold several before they were even done!
Tracy Francis
As the post states, it's been archived. If you were subbed last month check your email for your MyMinifactory Redeem!
Tracy Francis
Hey everyone, as the post states this has been ARCHIVED. If you were subscribed in MARCH 2025, you should have this in your MyMiniFactory Archive. If you did not get your email please MESSAGE ME! I'll get you sorted out, otherwise, you can purchase this one on MMF using the discount code in the Welcome and Info Post
L C
why can i not stll get this and one other from last month
KG3D
watchamahoozit 2025!?!?!
Christy Perkins
It reminds me of the Turkey (which I also love!) β€οΈ
Christy Perkins
Printing NOW!
Melissa Chamberlain
Adorable!!
MoXYZ Mfg
Thank you for testing a mini size.
Maddog M
This is absolutely beautiful
Tracy Francis
I'll ask!
Melyssa Daulton
Oh my goodness πππ
AB3D Printing
So cute! Would be great to know the filaments that Sledge Painter used, it's so pretty!
Deanne Murray
Omg love this!
Karli Kehres
Omg!!! I can't wait to print this π
Ashley Fenstermaker
Yes I love it π
Melanie St Onge
It's soo cute!! Thank you!
JR
Love this !! π«Άπ»
Silvyr
OMGoodness! YES! Thank you!!! Now, I canβt wait for my current print to finish
JMac Creations
Super cute!!!
