cinderwing3d
patreon
TINY Clover Dragon!
🕑 Added 2025-02-15 20:00:09 +0000 UTCThis was a FEBRUARY 2025 Design and has been Archived! If you were subscribed in November you will receive an email from MyMiniFactory within the week to access the archived files from that month. If you are starting your Subscription in MARCH 2025, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the MARCH 2025 Models will be in the MARCH 2025 posts tab as they come out over the month! https://www.patreon.com/c/cinderwing3d/collections
If you missed this model or any others they are available on MMF for purchase! You can get the most up to date discount code on the Welcome and Info post!
Hi Cinders!
This little dragon has been patiently waiting to be added to the Tiny Dragon Collection! I wanted to give it all to you in time for St. Patrick's Day! If you all want more of these tiny themed dragons please let me know below!
Remember, you can also easily make this into a keychain by putting a hole through it in your slicer. Holes for keychain, magnets, etc. are approved modifications for my designs. :)
-------------
Also, I don't like taking votes for my next design because, honestly, the pressure gets to me and shuts down my creative thinking. However, I would LOVE to hear suggestions. We have a suggestion board in our Discord chat, or you can simply suggest a design theme/creature below. If you like a suggestion already listed by someone, please like it so I know which ones are most popular!
Thank you all! :)
-Tracy
----------------------------------------------------
FILAMENT and Tools:
https://www.amazon.com/shop/cinderwing3d
CC3D Gold, Flashforge multicolor Yellow&green, Amolen Lemon Mint Rainbow Matte
-----------------------------------------
All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!
Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
11 Designs - FEBRUARY 2025 Models: HERE
Heart Tiny T-Rex - RELEASED - EXCLUSIVE
+ (2) .3MF Color Files
BABY Flying Serpent 2025 Remake - RELEASED - EXCLUSIVE
+ (1) .3MF Color File
Pot of Gold Spinner - RELEASED
+ (1) .3MF Color File
Tiny Hummingbird - RELEASED
+ (6) .3MF Color Files
BABY Crystal Dragon 2025 Remake - RELEASED - EXCLUSIVE
+ (3) .3MF Color Files
Tiny Clover Dragon - RELEASED
+ (1) .3MF Color File
Secret Design
Secret Design
Secret Design
Secret Design
Secret Design
-------------------------------------------------------
PLEASE READ
Please remember, NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Link to the PUBLIC MODELS and Exclusives Full Index List:
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments
TransForm3d Printing
Birthday Dragon For SURE!
K G
I would love a dragon or spider with cherries.
Ace High
Oops... Seems like I'm a bit late to suggest ideas... but here's some that I thought of while trying to figure out how to do comments on Patreon (And failing terribly lol). Birthday Dragon - You can have the horns be candles, or something like that. I think it would be amazing to have at birthday parties for people. Of course this would be probably easier with a turtle to see how people like it, etc. Cookie Turtle - I personally adore the Cookie themes, I know my friends sister does too lol. But what if you took the popular Sea Turtle and compare it with the Gingerbread Dragon or Cookie Versions you have been doing. Its quite difficult for me to put into words of what I mean unfortunately. Tiny Snake - I have seen and printed off the big snake but sometimes I do find myself fidgeting with tiny prints, maybe a tiny snake would be nice to just fidget with a bit. Should be decently easy since you already have done a few snakes before... Card Dragon - I used to do magic tricks long time ago with cards. I had a small idea and quickly drew it up, kind of looks a bit funky but I was thinking of your updated Tiny Rose Dragon and thinking how it would look with Spades, Clubs, Hearts, and Diamonds. Just a tiny idea in my head, probably doesn't work when actually designing but again, just a idea. Gummy Bear - Kinda a strange idea, but when thinking of cute sweets, Gummy Bears was one thing that came into my mind. Why Gummy Bears, I have no idea, nor am I even sure how that'll work. Tiny Axolotl - One comment I get a lot when showing people prints, I've done is usually "Do you happen to have a tiny Axolotl", which I could see being popular, some people I guess love to have something small to fidget with in their hands. Birds - The Hummingbird you did was absolutely gorgeous, I've found myself trying to print more and more than I probably should to see all the different colors I can make. Interestingly I thought of the idea of doing maybe a month of different type of birds or something kind of like that. Boxing T-Rex - I had one of my friends look at the T-Rex and to tell me what he thought of it after a day of messing with it, he suggested putting boxing gloves on it, I guess he got the idea from boxing kangaroos, but I think it'd be cute to see on a tiny T-Rex Dolphin - To my current knowledge, I don't think I have seen a Dolphin done by you. I just got done printing off the Narwhal and my sister assumed it was a Dolphin with a Unicorn Horn lol, but I can see Dolphins doing pretty well. Horses - Usually I find that surprisingly lots of people where I live like horses, I'm not sure how designing a horse would work out but it's just a small idea like all of these.
Laura Steenhagen
i would love this as a keychain!!!
Boomshakalaka
Baby Easter one!!
sNp
A donut dragon to add to the donut turtle
sNp
What about a sandcastle dragon. Maybe the each link builds to the top of the castle at the tail
Chris Browning
I love these tiny and baby dragons, I take a box to church for the kiddos every weekend so these are perfect!
Marti Reusch
bumblebee/honeycomb design would be so cute
Amanda Countess
I ~LOVE~ the tiny dragons! I have been patiently hoping for a Baby Steampunk dragon but now I also am hoping for a Tiny Steampunk dragon!
Kristin Coker
I would love to see a Dark Unicorn from you.
Laura Driskell
honeycomb dragon would be cool to have one with hexagons, black and yellow -
kim miranda
Dia de los Muertos dragon please!
Jazzy Bee
I'd like some micro dragons -- ones with large links that can be printed at 50-60mm sizes for the kiddos.
Imaa Surefire
I would love to see a daffodil dragon. I think the shape of that flower would make a stunning dragon.
M Huff
I like to suggest peppermint penguin.
Lidia Heinzel
Cute!🤩 Pony please😍
Melissa Chamberlain
I love these little dragons! Keep them coming please!
Camden Johnson
Would love to see something like a hydra! Or some elemental dragons!
FiremonkeyForge
That's crazy pretty!!
Maddog M
Love it
Lisa
Yes, more tiny dragons! Also, more Dice Towers please. The hourglass one hasn't been very popular but people LOVE the Mushroom and Nightmare.
Tracy Francis
The Fire Sprite is already so small so it won't be getting a baby!
Ryann
Baby fire sprite!
Amethyst Forest
Beautiful! <3
Shane Bill
Would love to see a St David’s theme Dragon Even a sheep holding a daffodil lol Wales 🏴
James
Dawwww it’s so cute!
David Lee
Would love to see more tiny themed dragons! ;)
Rebecca Couch
Yes! Thank you! I have the perfect filament ready to go!
Abigail Petri
I'll be printing that one!!!
Alyssa Rowe
Flamingo!!!
Jazzy Bee
So cute!
JMac Creations
Yay!!! Love it!!
