cinderwing3d
patreon
Great Stone Dragon!
🕑 Added 2024-05-25 23:30:49 +0000 UTCThis was an MAY Design and has been Archived! If you were subscribed in MAY, you will receive an email from MyMiniFactory within the week to access the archived files from that month. If you are starting your Subscription in JUNE 2024, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the JUNE Models will be in the JUNE posts tab as they come out over the month! https://www.patreon.com/cinderwing3d?filters[tag]=Exclusives
If you missed this model or any others they are available on MMF for purchase! Please use the Discount code: CINDERJUNE24
https://www.myminifactory.com/users/Cinderwing3D?show=store
-----------------------------------------------------
Hi Everyone!!
FINALLY!!!!
Introducing the Great Stone Dragon!
Thank you all for being patient this month! This guy was in testing for SO long. I really wanted to get the ball socket for the wings to hold and the front legs stronger before releasing it.
I have included a WINGED and WINGLESS Version!
Huge THANK YOU to Admin Jazzy and the members of the Cinderwing Test Team for all their thorough testing! It was an amazing group effort!
I also had a ton of fun making this crazy paint file for you all! Please see the attached pictures for an example. Hope you enjoy it! :) MMU .3MF INCLUDED! The MMU file is for the Winged version, I did not have time to paint the wingless one.
IMPORTANT Printing Information:
"Stoney" has been tested between sizes 60% - 100%, with many types of filament, and on several different settings.
This dragon requires good tuning from your printer. The ball sockets should work 99% of the time but if you have issues, try scaling the wings up or down by a percent. The multicolor 3MF can be split to objects and not loose it's paint job as well should you need to do so!
Understand that different filaments do shrink/expand a bit and this can affect the final print tolerances.
This is a matching body type to the Wraithwing Dragon, where it prints with the neck down and front legs folded. Once off the print plate: snap up the neck, adjust out the front legs, and pop in the wings for a stunning stance! The wings move around in their socket and are poseable!
Please see the pictures attached for the RIGHT direction of the wings; if you try to open them the wrong way they will not hold in place.
-
Filaments used: (link below)
Multi-color Black: Locyfens Silk Rainbow, SUNLU Silk Black
Multi-color Orange: ZIRO Passionate, iSanmate3D Glitter Sky Blue
Single Color: Silk Silver
Thank you!
- Tracy
----------------------------------------------------
All my designs are print-in-place and require no supports. All you need is a clean bed and you're off!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts)
Please join our discord chat below for more help and discussions.
Filament: https://www.amazon.com/shop/cinderwing3d
------------------------------------------------------
MAY 2024 Models: HERE
Rose Snake - RELEASED
Exclusive Baby Mushroom Dragon - RELEASED
Tiny Crystal Spider - RELEASED
Tiny Fairy Spider - RELEASED
Great Stone Dragon - RELEASED
Secret Design
-------------------------------------------------------
PLEASE READ
Please remember, NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments
Sarah
honestly, the amount of errors in these is getting a bit ridiculous. seems there is not enough testing before they are posted.
Susan Autry
Still having a wing issue. Wish I read the comments before printing. They fall right out. Don't want to waste filament messing around with scaling. No update yet, correct?
Darkora Cosplay
has this been updated?
Kimberly
Did anyone figure out the correct sizing for the wings? I'm wanting to print another set that aren't too large, but I don't want to waste filament.
Darkora Cosplay
i was just about to print this. nvm]
BMS Imaginarium
I'm really glad I'm not the only one having issues with the ball joint on this one. The first one I printed I used a silk filament, which broke when attempting to insert the wings. The second I used Bambu Lab basic filament and no problems, but as reported by others the socket seems really shallow and doesn't hold the ball part in place very well. There was another model similar to this one that didn't seem to have this problem. I love the model design, and I hope that a fix can be determined for it.
Kathy tran
sadly i should have read the comment first before printing .. i got the wing in but with slight movement the wing just pop out.. any suggestion
Vincent
Hello, I believe I had signed up in May but am unable to locate the "MAY" download pack. Could you direct me to where I may find this? Thanks in advance PEACE ;)
Keirra Hourn
one of my fav prints so far. its printing now (:
