cinderwing3d
patreon
Loch Ness Monster!! COLLABORATION Design!
🕑 Added 2023-06-24 23:00:03 +0000 UTC(FOR KEY, LOCHNESS MONSTER) This was a JUNE Design and has been Archived! If you were subscribed in June you will receive an email from MyMiniFactory within the week to access the archived files from that month. If you are starting your Subscription in July, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the July Models will be in the July posts tab as they come out over the month! https://www.patreon.com/cinderwing3d?filters[tag]=Exclusives
If you missed this model or any others they are available on MMF for purchase! Please use the Discount code: CinderJuly23
https://www.myminifactory.com/users/Cinderwing3D?show=store
(FOR LOCH) This was a special Bonus release for June from Gladiator Designs. It has been removed for July and is now available through Gladiator Designs.
------------------------------------------------------
Hi Cinders!!
----- (Please Read ALL Below, Important Information Included!) :) -----
We have a very exciting special release for you all!! - Our first Collaboration Design with Gladiator Designs! I have created "Key" the Loch Ness Monster and Gladiator Designs created it's Loch!
Both the Loch Ness Monster AND it's Loch have been test printed down to 30% and are extremely adorable! This pictures of both above are at 50% and 30% scale and are fully functional!
LOCH NESS MONSTER:
"Key" prints with it's neck on the print bed and comes PRESUPPORTED right underneath it. When does printing its an easy snap to break it off! The neck then "CLICKS" in place in the upright position and holds that position! :) The original size is pretty big and I would personally say the sweet spot size is 60% or 50%. For smaller prints (60% and below) it's recommended to use a brim.
LOCH NESS HOME:
This part of the collab was created by the talented Gladiator Designs! This model features a bottom, and a top water feature! They can be printed separately so you can have whatever color water you like. (Pictures about were printed with clear for the top water and blue for the bottom, then painted for rocks and flowers).
We wanted to print something special to this brand new design so we opt'd for this fun collab to make Key a lovely home!
Gladiator Designs has very kindly shared the LOCH with our Cinderwing3D JUNE Subscribers for Personal Use Only. If you would like a commercial license for Key's Loch you will need to grab one from Gladiator, who has a Vendor Special commercial license that you can use to sell the Loch!
Patreon link--> https://www.patreon.com/gladiatordesigns
Direct link to Vendor Tier checkout page--> https://www.patreon.com/checkout/gladiatordesigns/9665369
Thank you all for your support and for supporting new artists in the space! We really appreciate you all for making our dreams possible! <3
-Tracy
------------------------------------------------------
June Models:
- Tiny Hammerhead Shark - RELEASED
- Butterfly Dragon Tadling - SUPPORTER EXCLUSIVE - RELEASED
- Baby Ocean Dragon - SUPPORTER EXCLUSIVE - RELEASED
- Baby Loch Ness Monster and Collab Loch - RELEASED
- Dragon
-------------------------------------------------------
PLEASE READ
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (support@cinderwing3D.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admins (Jazzy and Turk) and Test Team for all your hard work!
Comments
Jazzy Plz
If you were subbed when it came out then it would have gone to your MMF archive, if you do not have it on MMF please send in an email (contactcinderwing3d@gmail.com) or a Discord ticket and I can get you sorted
Jazzy Plz
https://www.myminifactory.com/object/3d-print-key-the-loch-cinder-monster-305525
Thelma Ivy
how do I get the lochness ?
carrie roehrig
is there anyway i can get this again? i cant find it on any of my laptops and it isnt in my mini factory. ive been a member for a long time.
Jazzy
Then check you email for your MMF link! Per the pinned info post, all models get archived to MMF and you get sent and email with a link to redeem. If you did NOT get this email from My MIni Factory you will need to either send an email to contactcinderwing3d@gmail.com or via Discord so we can get that sent back out to you!
debra leeson
no ive been a member for months ........
Chad Presson
technically if you just signed up, this model will not be available to you because it was a June model, and its now July.
debra leeson
just wandering when the design is achieved and I'm a Patreon how do i download stl please........
Ryan Charles
Not sure if its been stated yet but what colors were used for the lake ness?
Ryan Charles
I made some purple one ons on x1c at 60% they are beautiful!
Ginney Davison
I printed Key and the loch at 60% and it came out beautifully, thank you for all your hard work!
Katsu's Dojo 3D
I haven't had a successful print of this yet either... ;(
Gary
I think model is super cute and love the design but have run into issues with presupported neck. tried running it up at several different sizes on my prusa's but keep getting failures where the supports almost meet the neck. Is there a way we can get an unsupported model to use our own supports?
Andrea DeJong
I made one last night! It's the absolute cutest!!
Kate Ettensohn
printing a few of these cuties at 60% right now. I can't wait to see how they look
Kari
So cute! Printed this at 60% and it's super cute. I have a Flashforge :)
Jayde Hilliard-Simpson
This one is super cute! And I think the new design with the neck is cool and will offer more in potential for future designs. Can't wait to try out the print! I also think the collaboration is really great, Gladiator has some really cool designs I had not seen before.
Stargazr69
OMG 20% is soooo cute and tiny! Impressive model for sure, Thanks for all your hard work
Jazzy
You'll need to provide more info! What slicer is this? A lot of slicers have a button to automatically lay things flat to the plate, you can try that!
Andrea DeJong
I am trying to print the water but it's showing a huge shadow at 60%. It won't go into the plate.
Jazzy
Give it a shot before you judge it. We tested this model for nearly 3 months. Trust in Tracy! I know it looks crazy but, it works! we tested this little cutie on everything from mostly stock Enders, Sovols, Anycubics, and Bambus!
Jason
Not so sure about the presupported neck. Lots of printers will struggle getting a clean outcome. No way to do the head separate with a ball joint and have the neck already upright?
Jeff Robinson
Very cute! Love it!
Jack from Layer Makes
This is a cute one!
FunkyNuggets007
Wow 😊😊😊😊
josh jordan
Awesome sauce. Definitely on my list to print
Stephanie Thibault
Ahhhhhhhhh!!!!!! Soooo cute!!!!
