cinderwing3d patreon

DARK Heart Dragon! (2 of 2 Heart Dragons)

🕑 Added 2024-01-19 20:00:06 +0000 UTC

Comments

Jazzy

Are you using Prusa? You have to slice to see the colors!

Cori Lepine

so this may be a stupid question, but I just recently got a dual extrusion printer. When I load the MMU file the colors do not come up? since this is my first time using it I am learning. I see how I can color the individual parts on my own then merge them together, but would like to use to color pattern you did already any advice or hints would be greatly appreciated

Andrew Gosnell

Jazzy's Painting Skills are on point! Great model and 3MF file.

Michelle-Nexus3DCreations

the sections are not connected

Jazzy Plz

Slow down on overhangs! Some filaments like to curl.

Adan Ramirez

diamonds inside hearts keep shifting both on A1 & X1C am I missing something?

Andrew Renton

I have had a few failed attempts too with the MMU file as well (front right leg at around the same layer numbers as you). Make sure you select all then right click and choose assemble. This got rid of the first error that you are getting. As for the floating cantilever error - not sure - I just ignored it and hoped for the best! Jazzy (Discord) suggested I try using a brim (thanks!) - will give the MMU file a try doing that next. I am now trying the stl version to see if that prints properly for me! I am sure it is something I am doing wrong or my printer being weird!! (X1C).

Dan Schoen

I have made several attempts at printing the MMU file on my Bambu A1 and it has failed every time. The last time around layers 15-20 the leg joints completely fail to print. I get two errors in Bambu Studio, the first is "newpieces.stl_3 is too close to others" then after slicing I see "It seems object DarkHeartDragon_Rev4.stl_1 has floating cantilever". I am fairly new to multicolor printing and Bambu Studio, am I doing something wrong when importing or slicing the model?

Jazzy

We actually already did this, was it the heart arch? It is a bit of an overhang so I would recommend going a tad slower there but we'll absolutely look into it again

Jazzy Plz

27 inches

Jazzy Plz

Various Bambu Labs printers, but these files will also work with Prusa's MMU as well as IDEX and basically anything that can use Prusa Slicer!

Mike Sprague

Just printed both versions - LOVE THEM - small note, the arrows inside the hearts of the Dark Dragon,had a few minor failures - so, if you do any sort of updating, maybe make them just a touch thicker at the point of the arrow?

Ed Sechrist

I am sorry if I missed this in an earlier comment, but what printer is being used for the multicolor dragons?

Jazzy Plz

That is correct. This was done to make repainting it easier. This way you can paint piece by piece!

Brandon Ryan

I went to change up a few colors and found that when the mmu file is brought into bambu studio all of the dragon links are separated and it is not as a whole object.

DeadLegato

Added to the que to print after I do some cosplay stuff!

Jazzy Plz

Your feedback is appreciated. The sharp tone is not.

Jazzy Plz

Hey there, we aren't able to recreate this. Did you by chance simpify the model? This will break the mdoel and it is not recommended you do so.

Shannon Hill

I'm also not sure who is testing these, but this is another dragon with missing bottom layers. Check the heart on the end of the tail's first layer at a .2 layer height, it takes 5-6 layers to be filled in. If anyone' getting adhesion issues there, that's why.