cinderwing3d
patreon
Archived: Orchid Dragon Release!
🕑 Added 2023-01-25 21:41:53 +0000 UTCThis was a January Design and has been Archived! If you were subscribed in January you will receive an email from MyMiniFactory to access the archived files from that month. If you are starting your Subscription in February, Welcome! Your exclusive models are available immediately in the Exclusive posts and the February models will be in the February posts tab as they come out over the month! https://www.patreon.com/cinderwing3d?filters[tag]=Exclusives
This model is available on Cults3D and MMF for purchase! https://cults3d.com/en/users/Cinderwing3D/creations
-------------------------------------------
Hi Cinders!!
Here is the first of the 2 Dragons for this month, The Orchid Dragon! This one is a January Model and the next one will be the exclusive!
There are 2 renditions for this model - Plus a Tail Keychain! I couldn't decide so I made both, then my test team liked both, so now you all get both! LOL! There will also be a Baby Orchid Dragon Releasing next month in February!
Filament:
Pink Dragon Filament (with silk white stripe)
Orchids are one of my favorite flowers and I'm excited to get them out for Spring!! Hope you all love these!
---------------------------------------
January Models:
- Hippocampus
- Valentine Hearts Bonus
- Tiny Phoenix
- Orchid Dragon
- EXCLUSIVE Dragon (Testing)
PLUS All exclusives in the Exclusives Tab under "POSTS" or in the link below!
---------------------------------------------------------------
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
Discord is our MAIN form of communication and way to provide help! Please join our community below:
- Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email:
- Email (support@cinderwing3D.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admins and Test Team for all your hard work!
- Tracy
Comments
Nicole Martin
I am having the hardest time printing this one with ZIRO PLA. It keeps coming loose from the build plate even though it is squeaky clean and I use glue. I noticed when I try to add a brim, no brim is added. Please help?
Jazzy Plz
you can still buy it! https://www.myminifactory.com/object/3d-print-orchid-dragon-271104
Jazzy Plz
https://www.myminifactory.com/object/3d-print-orchid-dragon-271104
HummingBird Designs
so gutted I missed this one
Jacob Snow
Where is the STL?
Terri
question: i am currently printing this vs2 but i see alot of supports that when its done might be hard to get off. is vs1 without supports ok to print or do i need the supports on this?
Mike Sprague
Will there be an Orchid Turtle???
DragonsAura
They are usually all tested done to around 60% scale
Hero Electronics
So, my printers usually shudder if I mention Cinderwing. Thank you for this departure from the extruder torture. ;)
Danielle Calabro
do the dragons scale down or what is the minimum percentage you can go down?
Nikki Line
do people leave the tail keyrings at 100% or shrink them down?
Laura @ Prism3D Creations
I love it, printing my second one already!
candace flanagin
absolutely love it!
Data Diva
Love it, going on both printers. I hope the baby comes early in the month so we have it for Valentines day sales.
Hero Electronics
Straight to the print room!
Kevin Stubbs
Had a printer before work all set for this model to drop. sending to the printer now while on lunch to get started lol
Brandon Hall
give it a minute or two. It's a big file.
Jill Woolsey
I can't get it to slice and have tried two different slicers. It will load but then it won't slice. Anything I can try to get it to work.
Aaron Sellman
printing on my V400 13 hours going to love this dragon
Sharon Caldwell
I got both to slice in cura just fine 1 day 2 hours!!!!! so excited
Allen Smith
I'll have to give v2 a go, I like the softness of it.
Kate Ettensohn
Just got to pick a filament. My printer just finished, so perfect timing
Tracy Francis
they are big files and can take time to load, but if you're still having an issue let me know and I'll ask my team! :)
Clayton Stroebel
Beautiful dragon. I have only a little bit of rainbow left. Will have to see if I can get a print out of it
Dan Kilmer
I like the design :) Well done, thank you!
Katherine Lawrence
Very cute. Can't wait for a baby version of this one!
MicrosoftSam
Going to have both prints running each right now, was just looking to put them to work as you posted. =)
Jamie Duarte
attempted option one and cannot get the file to slice in cura. anyone else having this issue or is it a me thing?
derek mccord
think my mom and her sisters will like these.
Johnny Davila
Like getting 2 dragons in one!
Tracy Francis
Yay! Thank you!
Bre
That'll be going in my printer tomorrow! Love it!
