1usmus
patreon
HYDRA 1.2B PRO - RELEASED! (+ONLINE-GUIDE)
🕑 Added 2022-07-18 16:44:46 +0000 UTCCPU PROFILE COMPATIBILITY WITH THE PREVIOUS VERSION?
- Yes.
DO I RECOMMEND A NEW DIAGNOSTIC?
- Yes.
ONLINE-GUIDE:
https://docs.google.com/presentation/d/1_j6vB61koOVwEHLrvqt7lh1RYw4XRuoTIeEDtYmnFj0/edit?usp=sharing
Special thanks to @Veii for helping me prepare this guide.
ARE THERE ANY LANGUAGE LOCALIZATIONS PLANNED FOR THE ONLINE-GUIDE?
- Yes.
CHANGELOG:
* Added MANUAL OC profile for HYBRID OC.
* Added fan curve control for RX-TUNER.
* Added the ability to set the penalty size when searching for Curve Optimizer values.
* HYDRA ASSISTANT has been significantly refined so that the user can solve the problem of a system crash without instructions or outside help.
* If the user has used HYDRA ASSISTANT after the system crash, you can find information about all the changes made in the HYDRA log.
* HYDRA ASSISTANT may offer to recreate profiles automatically or to clear the system log so that the assistant is not called again after restarting the application.
* Improved stability and performance of the HYBRID OC.
* Improved HYBRID OC wake up function after system sleep.
* Updated graphic effects of user interaction with the buttons.
* Improved user interface for the HYBRID OC tab.
* Calibrated the default values for diagnostics.
* Improved accuracy of profile creation.
* In the RX-TUNER tab, there is information next to the adapter as to whether it is active or not.
* The available processes for the CUSTOM profile are sorted by the amount of memory used operationally.
* A link-button for the new online guide has been added to the menu with information about the app.
* Added an indication of statistics for profiles which are used in AMD boost mode.
* Throttle activation time by the HYDRA protection system is now set in seconds instead of cycles for more convenience.
* Added new rule, autoloading of GPU or CPU profiles will not happen as long as HYDRA ASSISTANT requires the user to decide.
* HYDRA ASSISTANT will remove from the list of problematic cores all the cores that are duplicated (OS bug), this will avoid "double" action of the assistant.
* The log displays only the cores that the user has selected for diagnostics.
* Fixed a critical bug when HYDRA refused to start with some GPUs.
* Fixed rare bug when HYBRID OC could turn off when switching tabs in menu.
* Fixed a bug where enabling Overriding best cores caused the application to crash on startup.
* Fixed a bug when RX-TUNER could cause the application to crash while creating a backup of profiles.
* Fixed a bug that prevented the color indication of core activity.
* Fixed a bug where warning windows would appear when deactivating the internal BCLK.
* Fixed a bug where CO LT values could be lost for cores that did not need diagnostics.
VIRUSTOTAL:
https://www.virustotal.com/gui/file/94c8e10d2e9326cecbe4a9ba8df830747a87ee517a041e21d3490aeae379f08c?nocache=1
WHAT'S NEXT?
HYDRA 1.2C PRO - July 31
We're going into space, buckle up. The new features won't be long in coming.
:)
_______________________________________________________________________________
Thank you for being with me in these difficult times!
Comments
ZeRØ Kill
replaced now it works and everything is OK
Exact same issue on my 3800X3D Logs: ***HYDRA 1.2B PRO by 1usmus*** 07/28/2022 21:56:56 Microsoft Windows NT 6.2.9200.0 NVIDIA GeForce RTX 3080 AMD64 Family 25 Model 33 Stepping 2, AuthenticAMD AMD Ryzen 7 5800X3D 8-Core Processor ASUS TUF GAMING X570-PRO WIFI II BIOS ver. 0305 SMU ver. 56.53.00 TABLE ver. 3672325 DRAM speed 2133 MHz Creating a basic configuration file for settings... Creating a basic configuration file for CPU profiles... Setting AMD PBO2 to default values... Saving the diagnostics parameters... Checking availability Prime95 and Cinebench R23... Deleting obsolete diagnostic logs... Phoenix enabled... The search a CO for PBO2 has begun... Checking stability in a single-threaded load: STEP #1 CORE#1 CO: -15 22:02:28: Test #3 started! FFT MIN: 84 FFT MAX: 84 FMA3: OFF DURATION: 30 22:02:36: CMD_FAILED 90 22:02:36: CMD_FAILED 92 22:02:36: CMD_REJECTED_PREREQUISITE 97 22:02:37: CMD_FAILED 93 22:02:39: CMD_REJECTED_PREREQUISITE 92 22:02:39: CMD_REJECTED_PREREQUISITE 97 TELEMETRY VOLTAGE: 0 TARGET DLDO VID: 0 FREQUENCY: 0 TEMPERATURE: 0 22:02:39: Saving intermediate values... Phoenix disabled..
Eli Burns-Irvin
I am going on 1 week of running diagnostic... 0 penitality, 5950x
I use the latest beta BIOS for my B550, 7D13vA71(Beta version), released at 2022-06-29. >- Improved CPU performance of Ryzen 7 5800X3D.
#My System ------------------------- MSI MEG B550 Unify-X (MS-7D13), 5800x3D, latest WIN 11. ------------------------- #Getting the following ------------------------- Setting AMD PBO2 to default values... Saving the diagnostics parameters... Checking availability Prime95 and Cinebench R23... Deleting obsolete diagnostic logs... Phoenix enabled... The search a CO for PBO2 has begun... Checking stability in a single-threaded load: STEP #1 CORE#1 CO: -15 17:11:42: Test #1 started! FFT MIN: 4 FFT MAX: 4 FMA3: OFF DURATION: 60 17:11:49: CMD_REJECTED_PREREQUISITE 90 17:11:49: CMD_REJECTED_PREREQUISITE 92 17:11:49: CMD_REJECTED_PREREQUISITE 97 17:11:50: CMD_REJECTED_PREREQUISITE 93 17:11:51: CMD_REJECTED_PREREQUISITE 92 17:11:51: CMD_REJECTED_PREREQUISITE 97 TELEMETRY VOLTAGE: 0 TARGET DLDO VID: 0 FREQUENCY: 0 TEMPERATURE: 0 17:11:52: Saving intermediate values... Phoenix disabled... ------------------------- #Troubleshooting ------------------------- - Disabled the Windows Defender - Copied Hydra from C:\HYDRA 1.2B PRO to C:\Program Files\HYDRA 1.2B PRO - Installed the Ryzen Master after. -------------------------
I think there is something wrong, unfortunately every time I launched the diagnostic I was unable to complete it with this version, can I provide you with some additional logs? STEP #199 CORE#12 CO: -415 23:58:28: Test #3 started! FFT MIN: 84 FFT MAX: 84 FMA3: OFF DURATION: 30 TELEMETRY VOLTAGE: 1.344 TARGET DLDO VID: 0.992 FREQUENCY: 4200 TEMPERATURE: 72 23:59:08: Saving intermediate values... 23:59:08: Test #4 started! FFT MIN: 84 FFT MAX: 84 FMA3: OFF DURATION: 30 TELEMETRY VOLTAGE: 1.344 TARGET DLDO VID: 0.992 FREQUENCY: 4200 TEMPERATURE: 71.8 23:59:48: Saving intermediate values... 23:59:48: Test #5 started! FFT MIN: 1344 FFT MAX: 1344 FMA3: OFF DURATION: 30 TELEMETRY VOLTAGE: 1.342 TARGET DLDO VID: 0.992 FREQUENCY: 4200 TEMPERATURE: 71.9 00:00:28: Saving intermediate values... 00:00:28: Test #6 started! FFT MIN: 1344 FFT MAX: 1344 FMA3: OFF DURATION: 30 TELEMETRY VOLTAGE: 1.344 TARGET DLDO VID: 0.992 FREQUENCY: 4200 TEMPERATURE: 71.8 00:01:07: Saving intermediate values... Current CO values CORE | CO C01 86 C02 46 C03 84 C04 -12 C05 257 C06 288 C07 2 C08 -34 C09 -12 C10 49 C11 -48 C12 -351 Found CO values CORE | CO C01 86 C02 46 C03 84 C04 -12 C05 257 C06 288 C07 2 C08 -34 C09 -12 C10 49 C11 -48 C12 -351 Phoenix disabled... Phoenix enabled... The search a CO for HYBRID OC has begun... STEP #199 CCD#1 CO: -40 CCD#2 CO: -40 00:01:10: Test #3 started! FFT MIN: 84 FFT MAX: 84 FMA3: OFF DURATION: 30 00:01:15: Stress test stopped. TDC limit reached! 105.9A CCD#1 TELEMETRY VOLTAGE: 0 TARGET DLDO VID: 0 FREQUENCY: 0 TEMPERATURE: 0 CCD#2 TELEMETRY VOLTAGE: 0 TARGET DLDO VID: 0 FREQUENCY: 0 TEMPERATURE: 0 00:01:16: Saving intermediate values... Phoenix disabled...
Ricky Campbell
PBO2 Penalty to 0 for my 5950x
Ricky Campbell
YURI ,Why is it Taken so long in Diagnostic. Its like it is doing it twice. 20 hours later and still going , why so long ,Please Explain and i am not doing Rx-Tuner
Eli Burns-Irvin
Hey there! Thank you for the constant awesome support and updates! If I set PBO2 Penalty to 0 for my 5950x, will that cause issues? I am at about 26 hours so far with diagnostic running.
Diagnostic Tab has this in the startup Error on startup "Unhandled exception has occurred in your application." "Object reference not set to an instance of an object." Logging Tab shows "system.ArgumentOutOfRangeException:" etc.. I don't know if I am missing a dependency or what never had an issue with the previous Hydra versions. Thank you.
Tom Parkinson
Thank you for your continued hard work on this project and constant desire to push the limits on what is possible. Additionally a massive shout out to everybody who contributed to the guide. It is frankly excellent and while there is much I already know, it is so detailed that it really does cover all eventualities and questions the average user would have - myself included. Kudos to everyone involved. Keep up the great work.
Tom Parkinson
I had this issue. I fixed it by turning the "Auto-load app with OS" of, then on again, then saving a profile, and restarting hydra (hit the X and relaunch it). I think if you toggle the setting on and off but don't save a profile and restart hydra, the setting is lost or not saved (even if the option is toggled ON in Hydra). It seems to then save the settings and also automatically launch every time, after restarting hydra after saving the profile. You only have to do this once.
Hi Yuri, is there any known issue for the auto-start of Hydra when turning on Windows? I've tried a couple of times and the software does not start when I start Windows. I have to open it up independently every single time.
