buildzoid
patreon
2x16GB Hynix M-die 6320 CL30 with a Ryzen 9 7950X on a Gigabyte X670E Aorus Master
🕑 Added 2022-11-07 19:19:42 +0000 UTCEDIT: I set this up based on incorrect information provided to me by motherboard vendors. DO NOT USE THESE VOLTAGE SETTINGS
CPU: Ryzen 9 7950X
Cooling: fan on RAM, EVGA CLC280 on CPU
mobo: Gigabyte X670E Aorus Master
RAM: DDR5 Corsair Vengeance ES 2x16GB Single rank SK Hynix 16Gb M-die
RAM / IMC voltages
VSOC: 1.4V // EDIT: NOT SAFE
VMISC: 1.1V // upto ??? is safe
VDDG CCD: 950mv // upto ??? is safe
VDDG IOD: 950mv // upto ??? is safe
VDDIO_MEM: 1.38V // upto 1.4V is safe
VDDP: 1150mv // upto ??? is safe
RAM VDD: 1.43V // upto 1.6V is safe
RAM VDDQ: 1.43V // upto 1.6V is safe
RAM VPP: 1.8V // upto 2V is safe
RAM speed and timings
Speed: 6324Mbps (62x102)
UCLK to MCLK: UCLK=MCLK
FCLK: 2108MHz (20.66x102)
PRIMARY TIMINGS----------------------------------
tCL: 30
tRCD: 39 (could probably be 1 or 2 ticks lower depending on your sticks)
tRP: 39 (could probably be 1 or 2 ticks lower depending on your sticks)
tRAS: 30
SECONDARY TIMINGS-------------------------------
tRC: 68
tWR:48
tRFC1: 533
tRFC2: 300
tRFCsb: 200
tRRD_L: 4
tRRD_S: 4
tFAW: 20
tRTP: 10
TERTIARY TIMINGS-----------------------------------
tRDRDSCL: 4
tRDRDSC: 1
tWRWRSCL: 6
tWRWRSC: 1
tWRRD: 2
tRDWR: 16
Power Down mode: Disabled
DF cstates: Disabled
any timings not listed above should be left on auto.
Stress tests passed
500% HCI memtest
100x Linpack Xtreme 10GB
9999 seconds Ycruncher Component Stress test
Testmem5 Extreme1 Anta777
Performance
53.5ns AIDA64 latency
Comments:
Motherboard provided by Gigabyte, RAM provided by Corsair
Comments
HOBAKAS
can you do the same with 2x32Gb base 5600 with this board and CPU
Actually Hardcore Overclocking (Buildzoid)
literally anything with an 8 layer PCB should work well.
Eljo Anthony N J
Hey Buildzoid! Thanks for the post. For mem OCing, can you suggest a budget B650 board?
Hi Tek
Thank you for this, I was waiting for a guide for us that have a job that isn't overclocking 😅 One question, why is tRFC1 so high? I think I've seen other OCs with 100% stability in the low 500 range
