squirrelf3d
patreon
ApolloLander - 2025
🕑 Added 2024-12-08 00:00:29 +0000 UTC The common accessory zip is the same as the 2024 model If you have a working installed apollo there is no reason to re-print it, but if you have to re-print it, then highly recommend you get these new files. Mostly quality of life tweaks. I've fully reorganized the Apollo files in Fusion over the past week. Was getting lots of crashes so redid the "base" files that each hotend starts from — as each hotend setup starts from an old apollo, and gets chopped off to the core specific of that hotend and newer part of the apollo re-merged around that to generate backplate and main body variation, and can "quickly" mod all hotend files by just re-syncing each hotend with the edited base file. But that base files was getting over inflated after months/years of tweaks added. So now it's down to a very lean base file. The major update from the 2024 model, are chopped parts in the back of the main body, which should make install easier and less chance of wires being pinched. The backplate vertically printed holes are teardrop shape to compensate for the droop on such holes which allowed to reduce the holes size. There was a holes size flaw in top mounted hotend with M2.5 (dragon, rapid and such), that has been fixed here, hole was too large. It was functional but not ideal, and that's why I missed that error even though I mainly used those backplate myself. I took that opportunity to generate ender5 main body front the start Also finished up the Superfan/Ultrafan dedicated backplates for them (not something I have tested yet, but will do so as soon as I can) I dropped support for some extruder. but the classics are still here: orbiter 1.5/2.x and Sherpa mini/micro. Everything else will be an adapter (most were already). And BMG removed. (if you have a BMG I recommend you convert it into a sherpa mini or micro). If you absolutely must install a BMG, I can make an adapter, Most adapter will use the sherpa mini backplate. I also organized the file so I can directly export a step files from it, not something I could do before , and had to manually set things up. Which will be included on the next upload. Updated hotend (so far — will be updated on the daily if time allows): Creality Stock MK8 / microswiss (hotend only) Creality Spider Speedy Hotend Creality K1C (only tested the one with inner round heatsink ) Bambu (new tweaked hotend mount) Phaetus Dragon ST and HF Phaetus Rapido HF UHF v1 and v2 Triangle Lab - TZ-E3 Phaetus Dragonfly BMS Phaetus Dragonfly BMO Luke's Lab Chube Air E3D V6 E3D Revo6 Make sure to also download the separate common accessories folder (ducts, probe mount and everything else)
