ArtisanGuild patreon

Frostmetal Clan - January '21

🕑 Added 2021-01-02 18:36:40 +0000 UTC

Comments

BluSkyOne1

I just signed up on 2-28-21 for the February set cant download it ?

Terry Hill

Any models that are released prior to the month you joined are available in MyMiniFactory for a cost. Januarys models can be found here: https://www.myminifactory.com/object/3d-print-complete-frostmetal-clan-presupported-152100

David Dobbs

I just joined yesterday but their feed says we can still get the January files....how do we do that? I can't find anything.

Haunting Hyena

I think it was here at some point but seems to have vanished

Raymond Tanner

Thank you.

Chris Tindall

I can't find it here - but I found it through the discord channel - https://www.patreon.com/posts/oldburg-fallen-46928926

Chris Tindall

But there's no February showing up here, at least not for me. But I found the link through the discord channel... https://www.patreon.com/posts/oldburg-fallen-46928926

Raymond Tanner

I’ve tried using the link to get February release, but it’s not working. I’m getting no response from Artisan Guild. (Also I’m brand new to Patreon)

Glendon Anderson

i never get emails i just come here and download it form the link above.

Collin Porter

I still have not gotten my email with download link even though I signed up several days ago.... is service always this bad ?

law Galt

i cant find this months discount code for older releases. any one know where to find it.

BaseSteve

i got the email but the Sync link is no longer available

Phillip Burris II

You should have received an email from Patreon saying you received a message from Artisan Guild which will have the download link (one for Sync and one for MyAirBridge) and password in it.

BaseSteve

What happened? I just became a patreon to download them tonight because I saw how cool they are... it's still January, but they're not available?

Zachary Brumbaugh

It is Jan 31, why can't I download?

Gareth Jones

Same, Link is no longer available; however, it's still Jan...

DruelTheGamer

I would also like to download it please.

Bart Kelsey

Same. I'd like to download this.

Incandescent Dragon Creations

odd, the link is gone, yet it is still January.

Incandescent Dragon Creations

check temp. most resin needs minim 20-25C to print, some even need 30C. slow down your lift speed to 60, and print an amerilabs town test. see if at 6s you get 3 1/2 rows of pillars and the space needle. if these are not formed, increase exposure by a second and try again. once you get 3 1/2 rows or more of the pillars and the space needle, you should be able to print it

Samyrwinds

Hi, has there been any updates to the files? Don't see an update log. Previously was mentioned that you guys are looking into the presup file for the frosthorn base to fit smaller printers?

Philippe De Braekeleer

Awesome release. What's the scale of your minis? 32mm? Because I'm usually upscaleing to 40mm

rurk admin

link don't work

Mark Rønne

Any news on the renders for these?

Vincent Howard

Man I just got out the front of my armored frosthorn, you guys killed it! This is already my favorite model you guys have done so far, I love it. It dethroned the Hydra I bought from you guys. So cool.

MJJEPPER

Same especially with this set. It is so oversized. I ended up buying a 4K printer as the 0.35 um pixel is 70% of the standard 0.50 um. Seems to be working much better.

David Snodgrass

I would love to see some of those orc skeletons released as a terrain pack.

Rob Leonard

Has anyone noticed the weird mesh on the anvil's runes (not the AG side, the other side)? The AG runes look appropriate and a good depth to print, but the runes on the other side look shallow, and with a weird mesh...like some autofix utility screwed up. I see this on the unsupported and pre-supported files.

Joshua Crowley

the deepwood alfar and amazon set seems to be missing from my mini factory, is there any chance of being able to purchase those? love the models!

Dominic Beaudrie

My Frostmetal Skeletons failed. I mounted both pre-supported models on the Photon Zero. The supports printed, but the bodies failed. The lift speed is at 60mm/min w/ a 6 sec. exposure. Any thoughts?

Dominic Beaudrie

Opposite. You get the STL files and need to Slice them.

Sdspecter

Thanks for this. Will try it.

LordOOTFD

Try scaling the lys model in Lychee slicer, it will scale the model without changing the supports which may work better for you.

David Lyse

Andrea & Francesca, the Artisan Guild produces, in my opinion, some of the best, most detailed, and dynamic miniatures of all the artists for whom I am a patron. Please keep up the excellent work!

Samyrwinds

Any updates? Also, is there an update log for this month's files?

Robert Detmar

I had a minor fail with the cape, but only the cape. Otherwise it came out really nice for me (On a Sonic Mini 4k)

Artisan Guild

it was an error, thanks! file removed :)

Sdspecter

Scaled down supports fail a lot. Most the time I end up supporting them myself, due to me using them for my d&d game with a smaller size. Usually 80%.

Ian Martin

Is there anyway to get the great goblins from last month? It did say they would be avaliable for 2 months but i cant find a link for them?

Martin Dickson

Yep, printed successfully in the parts supplied. (LD-002H) Only failure I've had with the ones printed so far was a single shield where the delicate supports gave way and I had to reprint with some additional pins. Dumb question - did you reduce to 90% and re-support at that size or rescale the supported STL model to 90% ? I've done the latter before and the down-scaled supports weren't too good. [Edited to add - not with an Artisan Guild model btw, just a general comment on re-scaling existing supports.] :)

Ian Martin

I printed out frost horn last night/today needed 3 prints due the size. First time was a total fail but it was more down to my settings i reduced the lift speed then had no issues. The supports are great and leave virtually no marks just getting the printer dialed in for them was a pain. I've printed about 5 build plates worth now with no issues.

Cream Skate

Did anyone has successfully printed the frosthorn? Mine got stucked on the tray because it i to heavy (reduced to 90% to fit) and the supports couldn't hold him.

Cream Skate

Los publican de repente, ahorita no se si todavía este la oferta del sitio con el 50% de descuento. ese código te lo dan ahi mismo en la pagina de myminifactory.com

MrWho

Thanks for your reply. Guess i'll reduce speed from 40 to 30mm/min and give it another try.

Vincent Clayton

I did't get this bundle for the month of December

Ian Martin

I've now printed out a few of these and also dropped the lift speed and everything is coming out fine after these tweaks. However since they look so good and with the sale on MMF ive went and bought most of the other stuff aswell now. Dam you AG and your great mini's.

Ian Martin

Hi i've printed worg A with no issues. I used the pre-supported files. I did have to turn the lift speed down a bit on my ones as the supports where failing but after reducing the lift speed they are all coming out great. I've not done C yet so i cant say on that one.

Forge wandering

No entiendo. Cual es la clave para obtener descuentos en la pagina anexada?

MrWho

Does somebody else have problem with the supported "Frostmetal Worg A" and "Frostmetal_Worg_C" ? Frostmetal Worg A: From 3 prints the lower yaw is either missing or mislocated and the tongue does not like to stay in one place = splitting up. Frostmetal Worg C: His tail tip is ripping of the supports - that one has a different support structure compared to Worg A&B - and gets reatached later with the tailbase.

Enty

So... this is a slicer file? A conversion from an .stl?

D. Raynes III

.pws files are used by Anycubic's Photon printers. If you don't have a Photon or Photon S there isn't much you can do with it, you'll need to export the STLs or Lychee files to a different format.

Ian Martin

Yeah I've got it sitting on a small step infront of the radiator now so the while printer gets warm along with the resin did another print today and no issues. The only issue I have now is looking at all the other sets and thinking hmm should I get more 🤔

Tom Rolland

Seconded, (both living in Scotland and heating the resin). I also heat the build plate and find that it makes a difference too.

Enty

Sorry to trouble, but I've got a new-to-me file type (.pws) in the Frostmetal Ogre F folder: Ogre_Marauder_F_(lady) + Mani Gino.pws I looked up the abbreviation, which comes from Corel Paint - but it doesn't open as either an image file or a printable file. Can someone give me a clue what I'm supposed to do with it? Thanks in advance :)

Ian Martin

I upped the layer time by 0.25 I've got a mars 2 pro. I also heated the resin up a bit before I started I live in Scotland so its not the warmest at the minute. I did a second print and all went well.

Nathan Keene

I had similar issues when I started last year. I had issues with pieces breaking mid-print and just not sticking. I won't say this is necessarily the problem, but it helped me out. What I did was increase the layer times on my printer. Obviously different printers and resins will require different settings from mine, but increasing the base layers by (I think it was) 2 seconds made a huge improvement on my prints succeeding. I do think I added a second to my regular layers too, but if the base didn't stick to the build plate this could help. Other than that maybe adding an extra support to the axe to improve its stability during printing?

Ian Martin

hi i'm new to the whole 3D printing and having some issues and looking for any advice.i just printed out the first ork rider and the worg and rider came out amazing but the axe failed along the shaft and the whole base failed pritty much straight away. Anyone have any tips my build plate is level i checked before the print.

Scott McRobert

Hey, did you have any issues with the pre-supported files failing on the left arm/cape? I have tried twice now with this model and failing in the same areas :(

Lane Davis

great job this month guys i just printed doomfist and it’s so great it’s getting me back into 3d printing

Rory of Ynn

I've got a Photon Zero and fitting some of the larger minis is nearly impossible. I've swapped to 28mm scale because of this: everything I've tried fits when scaled down to 87.5%.

Timothy Storey

There are a few big presupported models that won't fit on my Mars Pro base too. Hopefully with the adjustments they will fit there too.

Montemore

No worries at all! You guys do enough for us as it is. I just wanted to ask before I supported it. Thank you for the response and the awesome miniatures!

Artisan Guild

Hello Montemore :) We normally don't support the standalone weapons as they are meant for digital kitbashing (for example by inserting into other releases hands), sorry!

Artisan Guild

Thanks! We are looking into it :)

Samyrwinds

Awesome stuff! Trying to print the frost horn now, but noticed the presup base doesn't fit the sonic mini plate - possible to have it slightly adjusted?

Montemore

Was there a pre-supported version of the stand alone weapons? I may have missed it. If not I can support them myself but if there was one it would save time. Great set by the way, I am excited to get back into painting!

James Harrison

Downloading now, love MyAirBridge so much more than Sync! No wonder you folks prefer Orcs and Ogres (and Dwarves) over the other races, you are masters at creating them! Considering how well your Zeek's turn out as well, I stand by my preference to one day see an AG Thri-kreen set someday so I can add them to my list of baddies for my FFXI themed campaign. Followed by an AG Tortle set :)

James Harrison

Maybe a zombie/skeleton version of each race AG has done so far.

Jimmy Trinket

Hi L.G, I'm not sure of the reduction scale for these models, however, I use the free Sid Scale set of miniatures from Printable Scenery to check the scale on my slicer. The set comes with 7 minis scaled from 50mm down to 10mm and even has a set for Flames of war. I scale all my stuff down for D&D and SID works a treat. You can also change his height for heroic scale. Good luck!

Jimmy Trinket

Holy heck, these look amazing! Thanks AG!!! And also really looking forward to the undead series, the skellys in this release look terrifyingly good.

Garry Rutherfurd

Love your work.. more baddies to come

Markus Jorissen

So effing happy to see the FrostmetalClan released. Imho your best release so far. Great start into 2021. Thank you!

Local .Guide

Thank you and awesome minis

Local .Guide

does anyone know the scale reduction for every model to fit into a normal 25-30mm base. I mean, just printed the big orc and its huge. Id like to have it scaled to a simple size, like an infantry unit.