ArtisanGuild patreon

Depth Ones Updated!

🕑 Added 2020-09-10 09:13:13 +0000 UTC

Comments

Estevo Machado

Hello! Im patreon and want to buy this ... any disccount code avaible?

M Payne

Any update on eye tyrant body? Had a failure today on it early in the print. Initial layers stick to the plate but none of the supports do.

Esteban

So will we get this set if we bought it from the Kickstarter?

Jeremy Whitney

Have the presupported files been updated? I purchased on 9/10 on MMF but had multiple failures, really excited to try these models.

darthweezy

Picked this set up, amazing!!!

Gingerbeard

q_q I purchased pieces of this a few months ago.

Matt Horbund - Potent3D

That is a good question. I dont know. I am sure Renato (who is doing them now i think) is very capable. However, it seems a number of us are used to supports that are thin and light but still sturdy, and noticed the most recent supports are not.

Easy

Is Greg no longer creating the supports? Did I miss the announcement? :O

Edward Lunde

Good to know I'm not the only one to notice this. I'm not claiming to be anywhere close to a resin printing expert, but I've had quite a few failures with these supports, mostly around the arms.

Jason Applegate

Thank you Benjamin.

Benjamin Engl

The weapon racks are in the welcome box here at patreon. They are the same as the ones in the buyable weapon racks packs on mmf. The weapons are included in the complete packs (i.e. depth ones)

Joseph Schulte

I'll add some things I noticed after picking up this set. 1. The supports ARE super heavy. The sheer amount of resin wasted on support material is pretty shocking. There's far more support material than I've seen on any other presupported sets, or, honestly, just having Chitubox do automatically. 2. Even with all the extra supports, I had a few of the modular guys fail - usually arms failing to print at the elbow. Every one of them, I reprinted after adding some supports for those locations, and they printed fine.

Matt Horbund - Potent3D

I will try to take some pics. i have been working and not really at the printer. the touch points seem heavy and dont come off easily like they have in the past. I have 2 mars going almost 24/7 and ive printed 100s of models, from AG, Heros Inf, Cast N Play, Titan Forge and more ... usually with my settings, im able to pull supports off super clean and not need any post clean up. this time, the touch points are so big and thick and deep i have to clean all the models. I only printed the Beholder :)

Jason Applegate

Hello, I just purchased the complete set on MMF. Are the weapon racks not included in the complete set? I can't find them.

Renato Tarabella

HI Matt, one of my beta tester show here the supports removal procedure. https://youtu.be/u8U18iJulOQ

Renato Tarabella

Are you talking about all models of the Depth set? Can you tell me what i need to check? We are analyzing what you meant.

Matt Horbund - Potent3D

I felt the parts that touch the model are thick and "heavy" rather than medium or light. removal was more difficult than normal. I had to do a bit more "post processing" work to clean it up. Im in 10 patreons since January, yours, HI, CastNPlay, Titan Forge and a few other that pre-support. Most are using "light supports" as much as possible to make them super easy to remove. These feel just thicker and heavier, especially where it touches the model. I see a few people like Philippe and RPGPrints had failures. i didnt. My resin settings are super dialed in and im grateful to not fail.

Philippe Thon

yes yes, we did :)

Renato Tarabella

we connected in discord this morning.. right?

Philippe Thon

Hi Renato, I can't send you a message on Discord, I would need your last 4 digits to add you as friend to send a message? Sorry if I missed something i'm not so familiar with the platform.

Renato Tarabella

HI Edward, i just gave to 4 testers a new presupported version of Xantaras Eye with pupil. I'm waiting for the print result today. It's a new orientation where all fangs are without any support. If you want to partecipate with us to the print test write me on discord @Risc66 and i'll give you the model. You can just analize it and wait for the test result. In this new version I also increased the touch point for all supports.

Edward Lunde

Hello, I am also having issues with printing Xantaras so it's comforting to hear other people having issues (otherwise I probably wouldn't have spoken up since I'm new to resin printing and expected issues with large models in general). For what it's worth, haven't had issues with the new Kobold models! Would I be able to get a new version as well?

Renato Tarabella

Hi Matt, do you mean the support it's self or the last part where it touch the model? You mean also the chrosshatch too much dense?

Renato Tarabella

Philippe & Jeremy, can you contact me on discord @Risc66 so i can give you, in the next hours a new version of Xantaras? Can you also send me on discord the photo that show how is failed? Thanks in advance for your patience.

Renato Tarabella

Hi all. I'm checking the problems that you all notified and after the change (and the test from our tester) we'll release the fix soon as possible. I'm very sorry for that.

Jeremy Whitney

Same trouble with Xantaras. Failed print on the main body (raft adhered to bed but support trees didn't). Glass half full, good to know that it isn't a new trend and that the monthly releases will still come out flawless Greg, thank you. Shame that the Depth Ones release won't have the same reliability - I purchased it separately specifically for the beholder model.

Greg Kourakos

I do the monthly release but I am not doing the older ones

3DPrintingAdventures

i'm having the same issue with Xantaras, the MMF old sets are being supported differently. typically I have no issues too with the monthly releases.

Matt Horbund - Potent3D

Just picked up the set. I have it on the printer now. The pre-supported files look like the supports are super heavy. No more light/super light supports?

DungeonTokens

I've had the same with Xantaras head, 3 prints on 3 printers all failed. Monthly releases work perfectly on my printers, pre-supported old releases have lots of failures.

Philippe Thon

Hi there, I've had big issues with the newly added pre-supported files of this set. I've tried to print Xantaras but had 4 fails on the body alone. I have no issues with other sets (printed balzoordan last week at 80% scale and Diggaz 100% scale last week too without a single fail using pre-supported files). Seems to me that the base is too thin and is not sticking on the plate. Same issue with Xantaras and with the Hive colossus, which failed at 30% of the print. Other than that keep up with the amazing work you are doing!

I Like the Cut of Your Gibbering

Thanks so much for updating the set on MMF! I was worried (but still 100% willing) to pay the $15 for the updated set after purchasing it in May. You guys rock!

Karen Schroeder

Bought the set on MMF and it's a .rar file. Is this intentional?

Israel Martinez

Downloaded the set tried opening the file to unzip and it wont open with the 7zip program. It keeps failing anyone else had this issue?

Renato Tarabella

Maybe you can be a Printer Tester of this set ;) If so, contact me on discord. Contact Risc66

Renato Tarabella

Hi Richard, Joshua. The Standalone weapons must not be there. In the next release i'll take care about that. The reason is because you can use them every where so you'll support them with the character that will equip it..

Glitterwolf

Vampires! Those and the Goldmaw Lizards are high on my wishlist!

Doug Poniarski

Awesome you guys are great!

Renato Tarabella

yes. these pre-supported set are free for who own the not supported ones.

Doug Poniarski

Awesome! If we bought the smaller sets from mmf will we receive an updated version of those downloads?

Renato Tarabella

The Vampire set is near to be released. Probably at the end of this month will be released alongside the Fighters Guild

Doug Poniarski

When will you be doing the vampires set?

Renato Tarabella

can you provide a screenshot example of these points too large? Would you partecipate to the test of outcoming release as 3 users I have in discord ? Probably you'll help to improve the quality of the future release.

Michael Peterson

it's not chitubox so i can't edit it if i need too, and i need too, as many of the connection points are to large.

Renato Tarabella

Hi Michael, what is the problem with the supports?

Michael Peterson

I do not like the new pre-supports.

Joshua Hiebert

I too am wondering this.

Bob Steele

Awesome Just picked up the set!!

Richard Wall

How come the standalone weapons are in the presupported folder but they aren't presupported?

Magnus Andersson

If you switch to the merchant level is ok to sell prints on auction sites?

DoctorDiscord

I had that issue as well, I clicked "go back to Object" (or something along that line), and when I selected [Download] again, this time it worked. Give it a try.

DoctorDiscord

YEEEEEES!

Wedjat Ecou SRL (RO36777360)

I purchased them and I cannot download. It says that the files are missing

Ron Staton

Where do the Lizardmen fall in the rotation?

Michael J Greeley

For some reason the code is not working for me, I just get error, please try again.

Josiah Blackie

Printing the Hive Colossus now :)

Cary Porter

Does the eye tyrant come with a version without the eye rays?

Robert West

Ill be adding this to my collection

DrHolliday

Aaand there it is! Thanks 😊

MinionMancer

Added to my collection ❤️👌🏻😁

DrHolliday

Amazon add-on backer: just chiming in to say I don't have anything in my email yet! No rush but just a heads up in case others are having the issue too 😬

Nicholas Brennan

Gonna buy this as soon as i get home from work

James Harrison

Bought them a while back with the discount code so happy to have pre-supped versions now as well! Can someone with more experience with MMF advise, once we purchase items, they remain on my Library permanently correct? Would love to clear up some space on my laptop.

Loki Frostborn

I'm gonna have to nab this set, I've really been loving your work. I'm really hoping to see some more combo sets of your older works, they're so many I wanna get.

Tyler Brenot

Nice. As a new patron, the discounted updates are fantastic to slowly build up my AG catalogue.

Thomas Spink

Oh and I forgot to mention... Keep up the awesome work. I always look forward to your next creations.

Thomas Spink

This would be a good example of Patreons sharing their monthly releases on MMF instead using Sync or Dropbox. Have you explored utilizing that option for future releases?

R Boz

Thank youuuuuuuu!!!!

Pandaxsaurus

If we have certain ones we bought off minifactory will we get the updated supported files?

Herudo

Great work, thanks a lot. Just a small request, but could you in the future leave the bigger models solid? The thinkness and the holes are somtime off, i would like to do it myself but Chitubox cannot hollow a modell that is already hollow since it only hollows the space between outer and inner wall.