Leakoo
ArtisanGuild from patreon
ArtisanGuild patreon

Fighter Guild Set + Tarasque - October 2019 Release

🕑 Added 2019-10-02 22:23:28 +0000 UTC
Fighter Guild Set + Tarasque - October 2019 Release

Comments

Artisan Guild

check your pm :)

Hey Artisan Guild, I've been a patreon supporter of yours since September but I just noticed that i had missed this set, is it possible to get this set still? Thanks!

Artisan Guild

Hey, add-on was a special offer in the KS

Artisan Guild

check your pm :)

Hi Artisan guild!, I also missed the October sets, is it still possible to get them? I am very new to patreon but pledged to you in October. I am also a kickstarter supporter too! I will try not to miss the newer ones and download them early from now on.

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Hi, this might be too late: I'm a late backer for the Amazon KS, how do I get access to the add-on option?

Artisan Guild

check your pm :)

Jakob Frederiksen

I too missed this one along with the september set(the download link didn't work at the time I tried)

Travis

If I missed the October set, although I paid for it, how do I get it?

As with some of the others here, I also missed this one :(

Jason

Hi there. How do I get the October set? I forgot to download it last month. (I have been a subscriber since August)

I didn't know how to download this file. I started support in october, would it be possible to get the link? Thanks!

Mike Liebke

Hey I missed the october set (supporter since august), is it possible to receive a download link?

Robert Harbo Staun

Hi! Somehow I didn’t download the Fighters guild file. I must have confused it with some other download. Needless to say I’m quite bummed out. Any chance I can get a link as well?

Hey there! I subscribed to Artisan Guild in September. Was away on tour and missed out on October..any chance I can still get a link? These look AMAZING

Artisan Guild

check your pm:)

Hi! Due to travelling for work and moving houses, I missed out on downloading Oct months files. I've been a patreon since Sept, is there any way of getting the download link?

Hi guys, I missed out on downloading this set in October because we were changing internet providers. I've been a patreon since august, any chance of getting the download link or is the only option to purchase from the store?

Artisan Guild

check your pm :)

André Nuñez

Hi. I've started contributing with your Patreon last month. How can I access the October files? Or are they available only for that month?

Agustin Medina

Hi! I wasn't lucky enough to time the download of the 2 "Troubles in Taverns" free bonus figures. I participated during oct and already have the fighters guild and the tarrasque, but lost the window for the two extra minis. Is there any way that I can get the link for those?

I'm sorry to bother but I downloaded this pack once it came out. I'm just coming back now to download November's and am realizing the two tavern bonus figures were added to this pack later in the month. Any chance I can still download them? Thanks : )

Artisan Guild

hello you get this month :)

Artisan Guild

it is now working :)

Same here. Maybe I havent full understanding of your shedule. I got a Patreon today. Will my first pack be the last months or this months one?

Jérémie Mosset-Chafik

I can't make the code work. Is there a process that makes it available to Patreons only because that could be because of that as I subscribed the 1st november (wish I did the day before for this pack ;-) )

I am new to patreon it looks like from the other comments that files can only be download for that month? If so, I have also missed downloading and I apologize, but could I also get the code? Thank you so much, your models are amazing!

same here, cant get the code to work. :)

Sinister Snickers

Trying to purchase more of the previous models from store and the code isnt working...:(

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm :)

Artisan Guild

check your pm

erf... I forgot to download it

Artisan Guild

Thank you for telling us! We just contacted MyMiniFactory manager to make it work as soon as possible. thanks again :)

Artisan Guild

Hello, unlucky we need to wait for Patreon to process the new months payments. As your pledge on Patreon is tied to this month, you're meant to receive this monthly release, not the previous one.

Mert Usta

I think files should be accessible, until the new package is released, kinda frustrating not having the listed package as the "month release".

Tom Rolland

Hello. My Patreon member discount code was not accepted on myminifactory.

Jan van Nyenrode

Had the same issue. Would it be possible to open the link for a day more to help out all the new patreon newbies (like myself)?

Hopefully, we still going to get Stl for October.

Serp

Link is expired. Please send help

i just signed up as a patron and the link is expired, and patreon is saying i get charged for november in an hour... so can i get a working download or did i just lose 10 bucks for trying to get in on the October bundle?

Chris Winn

EDIT: Disregard - I was a good little patron, and downloaded at the very beginning of the month to avoid the issue. I have been trying to access the files for the past 24 hours, to make sure I got it before the end of the month. Is the link broken, saying it doesn't exist? Didn't know if it was a traffic issue. I had to get my computer back to do so, and thought it went right up until midnight on the last day of the month? Maybe I am mistaken...

MrFryGuy

Greetings I extracted the ZIP file and my Korg 2 Headed dragon file is corrupted and the links no longer work :(

I also can't access the links, could i get access again?

Emilio Javier Micheletti

I cant access the link, i already downloaded the set, not the troubles in taberns addition, could you please send me the link for them?

Hi. I also just subscribed and the links are not working

Eliot Lyons

possible to re-link please?

Hi Just subscribed. May I get access to the files?

Billy Buffet

Hello, just subscribed. May I get access to the files?

Artisan Guild

check your pm :)

Donna Crawford

I haven't managed to download the October files yet, (I was hoping to have my new computer by now but the order has been delayed), Are the links still active?

Artisan Guild

check your pm :)

I tried to open the terrasque and the link seems broken

I missed the kickstarter, can we buy pieces from this? I really want the Medusa and the panther queen minis!

Sak Knows Best

I would really like to see in the future a Fighters Guild 2 bundle with bows and crossbows! And two handed swords maybe as well!!

Happy

Try to unzip it in another program. I have the same problem, when trying to unzip in Total Commander. After that I have found, that if I do it directly by Windows Explorer, then everything works fine. Strange, I know.

Please provide Tarasque as a whole model. I do not wish to print it in parts.

Artisan Guild

in the fighter guild folder

Andrea D'Amore

korg and brend .....

Artisan Guild

In this post there are 2 link for the download... One of these is the Tarasque :)

Andrea D'Amore

In witch folder are the bonus miniatures?I have not found them

Matchu Egan

Link doesn't work on app, fine on desktop

Jim Allen

Artisan guild not if the link isn’t working inside the first , I am afraid this isn’t the first time it has happened to me 🙁

Artisan Guild

they are inside :) but you can just download their folder

Alex Lopez

go into fighters guild link and they are bundled in there

jaman

i have same problem :-( do I have to download the whole monthly package again? and new models are in it or? Thank you for your help

Jim Allen

There is no link for me to get them ☹️

Michael Klinger

When I try to unzip the download all sync zip I get a Failed CRC check.

One of the issue is, Google is picking this up as a virus. You just have to whitelist the site and also white list the stl's

Artisan Guild

check your pm :)

Artisan Guild

We will investigate the problem today, it's very strange. Unlucky Dropbox (premium) gave us the notification that we exceed the download limits, even on their paid subscription. That's why we had to switch on Sync :(

Artisan Guild

Hello Peter, please try on another device, as it worked fr everyone else. Unlucky Dropbox (premium) gave us the notification that we exceed the download limits, even on their paid subscription. That's why we had to switch on Sync :(

Peter Seymour

Hi i'm having problems downloading this months pack from sync.com it wont pack a zip, is there a dropbox link like normal?

I've just become a patreon and would like to print it 100% as well. Since I'm quite new to the whole thing of 3d model printing, could you share picture on how to properly set the supports to not waste 8+ hours of printing on wrong settings. (sry for bad eng, not my first lang)

Brian Todoroff

Sync.com is failing to download this, the Welcome Box and anything other than single files. It always gives "151011 An error occurred creating zip" or just hangs forever (or at least 10 minutes) on "Calculating size - please wait". Is there Dropbox link or something more reliable than Sync.com. I've tried multiple computers and both Chrome and Firefox.

John Watson

When trying to use the "download all" button on the website it fails to create the zip...the only way I can download is to download each STL file. Am I doing something wrong?

Happy

New here, so maybe I am doing something wrong, but anything what I have downloaded from SYNC in zip file is corrupted (CRC error) and cannot be unziped :( I have tried welcome pack, Tarasqu, fighters guild, all the same ...

New to your works and I must say I love them already! I really love the bases but usually do the rounded bases. Any chance you can make rounded or know of a way to convert them to base inserts for easier printing? Thanks and keep up the great work!

Kady

LOL I litterally just came here to ask this :)

Kady

Is it possible to please get an assembled version of the Tarasque model? I am trying to scale it down a bit for use in my game and having him assembled would ensure proper scaling and fitment for all parts. And also give me the option to print him as one piece , which I am tempted to try :) Thank you!

Alan Devine

Any chance of releasing big monsters as one whole sculpt as well as the individual files?

Hey. Im 4 pieces of Tarasque in. I forgot to scale it down si it is 100%. It is realy HUGE. https://imgur.com/2o2vO6M https://imgur.com/Ldr0qRE https://imgur.com/HFeTeYK Cant wait to print whole monster. It will have more then 30cm I quess. Very nice sculpture

Alex Lopez

Not sure if this is the section to do any recommendations for monthly releases, but would love to see Centaurs or Dragons

Che Phillips

I'm Scaling down to 93%, close enough for me with out getting to fiddly.

Jorge Zaragoza

How much do you scale them down for D&D?

Michael

Hey..did you already release the epic angel guy? Can't seem to find him.

Mäx Rakete

Are you planning to make more/bigger (as in more units) modular models in the future? These are really great!

Artisan Guild

From the App strangely enough it doesn't work. The app seems more like a beta than a finished product. We tried on browser and Tarasque download and show files perfectly, not sure on what's happening from your browser. Are you using chrome?

Sean Croteau

200mm

Joshua Westman

I found I cant open links in the APP. I have to utilize the web browser. But now, I downloaded the terasque file and all the files say 0 bytes and there is nothing to view. Something I'm doing wrong? Haven't had this issue before.

Joshua Westman

I cant click the links

BennyMcSeoul

what size base will the tarrasque fit on?

Artisan Guild

Thanks for spotting that! It's corrected now :)

Artisan Guild

Hey :) yes ad Greg says better to mirror it. The release s are areound 500MB and if we are not careful with cloned pieces it becomes easily 1 GB. That's why we include weapons in one side, you can simply mirror it :)

Benjamin Hodges

Is the Pectoral_Right of the very cut up chest missing its key (the sphere) sections or is it not supposed to have them?

I swear looked around my slicer for probably an hour before asking... thank you for the help, I found it after I read your comment ><

Greg Kourakos

you can mirror anything

Should the modular fighters have a Left and Right version of each weapon? its looks like they might in the picture.

Artisan Guild

price is not a problem (any service is cheap actually). Sync is the only one with unlimited band :) So at release day everyone can get what they pledged for

John Norton

Well, Sync looks to be working well - slow download speed, but hopefully won't be too expensive for you guys.

Artisan Guild

we met the traffic Limit, we are making a new working Link in less than 1 hour :)

Artisan Guild

we met the traffic Limit, we are making a new working Link in less than 1 hour :)

Artisan Guild

we met the traffic Limit, we are making a new working Link in less than 1 hour :)

Artisan Guild

we met the traffic Limit, we are making a new working Link in less than 1 hour :)

Artisan Guild

we met the traffic Limit, we are making a new working Link in less than 1 hour :)

Artisan Guild

we met the traffic Limit, we are making a new working Link in less than 1 hour :)

Jon Lamkin

There is a 404cerror on the download ;oml

Craig Stokes

I get the following error when following the download link: 404 We can’t find what you’re looking for.

Gavin smith

Same says limit reached

Still not working

joshua

liiink

Whiskeyjack

Yes but Duncans current service Sync is a nightmare its slow it crashes and the download all button almost never works without an error, last month it took me weeks to get his files. I hope Dropbox opens up today again its usually more friendly than this.

Jorge Luis Aragón Martínez

Link not working

Chris

Dropbox limit happened to Duncan Louca a few months back as well. He had to change services

Matt

Yeah not working for me either!

Whiskeyjack

Oh no Dropbox is not letting me download :( it says Too many requests Sorry, this link has been automatically turned off for now Nooooo!!!! I'm now fully addicted to Artisan Guild Minis and I'm hurtin' for a fix before work

Ondrej Masin

Link is down due to traffic limits :(

Artisan Guild

we are making an extra version with more cut to fit the bed :) coming in the next hours!

Artisan Guild

we are making an extra version with more cut to fit the bed :) coming in the next hours!

Artisan Guild

we are making an extra version with more cut to fit the bed :) coming in the next hours!

Artisan Guild

15 to eyes. we are making an extra version with more cut to fit the bed :) coming in the next hours!

Artisan Guild

it's not in the plan right now but I think that the Modular could work for blood bowl (fist only), no? :)

Octavio Carlo

These fighters look amazing! Can't wait to print them. If I may... the helm option is sooooo cool. Would it be possible to get it as a standalone bit so that i can print just the helm and use it as a conversion bit for my stormcast?

I love your models. Do you think to do Blood Bowl teams?

Bernat Rovira Lastra

Join the kickstarter Amazons!! Its cheaper and it will help to reach the stretch goals!!

Matt Fu

Is there no discount code this month? OR am I blind?

This is a spectacular release, Amazing work!

Hey! Can you pls add a great sword for the Fighter Guild? That's a big wish form me :D

John Norton

Perfect :)

Artisan Guild

Please wait, i'm making a version to fit resin printer too today :)

victorgonal

Yep, unfortunately the Tarrasque's upper and lower body are too big for the Photon. I had to resize it down to 62% and angle it. So I guess I will slice it right through the middle and work later in glueing the two pieces together and repair any possible damage.

John Norton

Great to see the cutting room floor in there now and also the improved folder name - very useful :) Also will there be an update to include all the images or should I just potter off and find them? I only ask as its so much easier to track down the right model quickly with images included. (edit: NM, I got them - could be useful for others though)

Galli3d

Have a go at cutting and pinning in Meshmixer, it's a useful skill to learn and it doesn't limit you with the mars build plate :)

BennyMcSeoul

yeah for me, the lower and upper torso both don't fit on the buildplate for my Elegoo Mars.. having them both cut once more would probably do it...

ssandulak

Damn I was super happy to see the tarasque, only to be disappointed cause it's literally too large for me to print on my elegoo mars. Still looks snazzy though...

Thomas Stalhood

Amazing as always. And best beauty yet!

Anders Knight

Holy cow the tarrasque is gigantic! Love the models for this month :)

Stephen Brewer

This months Beauty is amazing. Fantastic work all the way around. I can't wait for the Elven Rangers (whenever they come around), and hopefully a mages guild at some point. :)

3DPrintingAdventures

amazing models as always! your models make me want to buy another Resin printer so I can see what they look printed quicker, lol.

Eric De La Rosa

whats the size of the tarrasque

Mzak

Also if you need help there are plenty of great guides on the internet to assist you in this. GL fellow Guildies!

Mzak

Hi Everyone, Just a heads up if your going to use resin to print that giant beauty. If you are using chitubox slicer you can hollow out the print to save on resin. I would 100% reccomend that to save alot of money on resin. you will also need to burrow some holes in the print to he prevent suctioning issues. I will be placing mine for example on the left foot beneath the foot itself since it will be on a base after the fact and one at the joint to ensure I will not have suction issues and to allow extra resin to drip out. I will also keep the holes i dig out to place back into the holes to ensure that Should some resin somehow not finish curing correctly I will have it fully seal and it can naturally finish its curing over time before painting.

Alex Lopez

the fighters are fantastic! love the knights.

Maeyanie

Nice, a Tarsque which actually looks as terrifying as it should for a change.

John Wigger

Yeah, I'm trying to figure out the largest I can print it so far it's like in the 50% range

Mzak

oof that chest section is just to big for my resin printer. never the less where there is a will there is a way! I will make this thing stunning one way or another!!!!!! So Happy I found this place!

Andre Vo Nyseth

You have done it again 😊👏

John Wigger

Yeah, I was trying to size it up for the Elegoo Mars and like 54% was the largest I could get the chest :)

Matt Dowis

Awesome. Was just about to ask if you could cut the torso up some more for resin

Artisan Guild

Guys the Tarasque may be big at fullsize for some printers, we will simply make a version with an additional cut in the torso for who needs a super giant lizard ;)

Joshua Still

This is so awesome.

Well done! Thank you

this set is so huge !!!!

John Madigan

Deathclaw!!!!!

Joey D

hehe, and 'cutting room floor' mini has a hearthstone on her belt! love it! :D

Emilio Javier Micheletti

Awesome!!! 👏👏👏👏

Joey D

excuse me a second... I just need to pick my jaw up from the floor :O just... wow, that Tarasque... simply awesome! thanks!

Joris Kelderman

YAAAY, Can't wait to print these. They are in top of the queue after my PC mini's who have priority :D


More Creators