1usmus
patreon
HYDRA 1.2H PRO - RELEASED!
🕑 Added 2022-11-30 15:14:38 +0000 UTCFix is uploaded at 20:00 (GMT+2) !
Ladies and gentlemen, meet "blackout" update :D
Even though we have electricity 6-8 hours a day, I've been able to get quite a bit done this month. A detailed list is just below.
Zen 4 users, pay attention to what is written in the log! If you see that there are incomprehensible words or symbols - there is no support! Do not try to run diagnostics if there are errors in the log! The current build for Zen 4 is the alpha version!
--------------------------------------------------------------
TO USE THE AUTOMATIC UNDERVOLTING/OVERCLOCKING FUNCTIONS, INSTALL MSI KOMBUSTOR IN THE ROOT FOLDER OF THE APPLICATION!!!
CPU/GPU PROFILE COMPATIBILITY WITH THE PREVIOUS VERSION?
- YES
ONLINE-GUIDE (coming soon) :
https://docs.google.com/presentation/d/1_j6vB61koOVwEHLrvqt7lh1RYw4XRuoTIeEDtYmnFj0/edit?usp=sharing
--------------------------------------------------------------
1) RMP profiles for all video cards. By default, a universal preset for video cards with "successful" and "unsuccessful" quality silicon could not be created. That is why you are faced with a "change and try" system. You can configure them by offset with respect to core, memory subsystem or Soc. More offset means higher performance.
You can find it here.
Note that applying the profile causes the video driver to restart, you will definitely see a blinking screen.
2) Search CO for Zen 4 in range from 0 to -60, and also do CO search relative to PBO settings and maximum temperature. Ryzen Master can't do any of the above.
You can also see a more simplified version of the menu with settings for diagnostics.
3) Additional test Cinebench R23 1T is introduced into diagnostics to check stability of found CO in light load. You can find it under FIND AMD PBO2 CO (see picture above).
4) DCFR is a favorite calculator for DRAM. You can apply a profile in 1 click (new timings, signals and misc settings). Unfortunately the amount of work is huge and only a few profiles will be available for review (temporarily this is Zen 3). Roughly speaking, this is another huge project that becomes part of HYDRA.
You have the most flexible control system of applicable settings available to you.
5) Improved Zen 4 support for HYBRID OC. For example you can make the system work with different temperature limits for each profile: gaming at 60 degrees, working applications at 70 degrees and single threaded load at a maximum temperature of 80 degrees.
I also want to say a few words about Zen 4 support. This is a completely new system, it will take me some time anyway to make the diagnostics accurate and the HYBRID OC more productive. Patience and patience again.
6) Added possibility to ask HYDRA to turn off computer after diagnostics. Or vice versa. The control is on the LOGGING tab.
7) Fixed some bugs for RX-TUNER.
8) Improved stability and performance BOOST TEST.
9) The list will be completed a little later.
VIRUSTOTAL:
https://www.virustotal.com/gui/file-analysis/M2IzMDJlOTg0N2FlYWQ2NzMyYjRhOWQzMTRlZjRiOGQ6MTY2OTgxOTcwOQ==
Thank you for your support!
Comments
Andreas Trampenau
Uff... My first steps with Hydra. After starting the program: 12/26/2022 22:32:34 Founded CO values and HYBRID OC operation requires calibration for Zen 4. Stay tuned for updates! Restoring the diagnostic process. Please do not take any actions. AMD Ryzen 9 7950X 16-Core Processor Stepping 2 MSI MPG X670E CARBON WIFI (MS-7D70) BIOS 1.41 SMU 84.79.204 TABLE ver.5505028 DRAM speed 6000 MHz
Lupe Del Toro
All that time in diagnosis mode to give me a poor result I get better results with the standard PBO2 from the motherboard.
i used rxtuner and then return to default settings but my GPU is overheating now. How to i revert all options to default? I want to erase all rx-tuner effects from my gpu
What are your temps like? I once ran into an issue because I didn't realize my bios had reset fans to stock curve and the cpu was hitting thermal limit during diagnosis. I imagine if your trying to limit power you are probably running a bit hot, no?
22.6.1 still recommended but i've personally had no issues on the latest drivers
I didnt used hydra for now because ive got some questions and still cant connect to the discord but ryzen master didnt find even 1 stable setting for me with the 5800X. I used per core and all cores optimazitation but nothing worked. But im not quiet sure how this hydra tool works. I want to find the best setting for a ppt of 100w or even lower because this built will went into a itx system.
curve optimizer -30 all core. or undervolt it a bit.
Hi do you recommend still using Adrenalin 22.6.1 or are the newest drivers ffine?
R7 5700 x 2080ti full waterloop 4 x 8 gb cl16 3600 ram oc to 3800 crucial ballistix mb is msi mag b550 tomahawk
Using gold corsair one 850 wats
Like the older versions, it didn't work for me. Ryzen 9 5900x. Even with several readjustments it keeps crashing and showing rather low results. Gave Ryzen Master a shot and the profile ran instantly and 3D Mark tells me I'm in the upper 5% of the results. Further I had repeatedly issues after the app auto started, with the app crashing. Had that issue already with CTR too when I was using it for my Ryzen 3600, found a well performing profile there though. Anyhow, I love your effort and hope eventually this software will become more stable and reaches its goals.
There seems to be a typo on the button to apply GPU settings to the PowerPlay table. It says "draphical" instead of "graphical"
Koen Dijker
Hello Yuri, I did a clean installation of Hydra 1.2D. Once I try to start CPU Diagnostics I get an error: Unhandlet exception.......etc. Followed by: Value cannot bet null. Parameter name: sourceArray.
what's your config? same for me and solved swapping the PSU with a better one, same power but Gold instead of bronze. May you need more juice to oc your cpu as me.
Daniel Robaina Cazorla
Hello! does anyone have the game profile not activate? ive read the guide, set the core trigger and the memory trigger as stated in the guide, but when the game is launched and those trigger threshold are met, the profile does not activate. Am i missing something? thanks!
What does that mean fullfilled account? Something like adress and so on
Still maybe some support possible?
Nope
Yuri Bubliy
Don't get me wrong, your system is unique and it is unparalleled. Even a successful diagnosis does not guarantee you 100% success. The user manual can help, I try to keep it up to date. Was the previous build stable?
I know man but some help would be nice i rly love ur program
Yuri Bubliy
It took me 3 years to create this OC sandbox application. I created a manual that people refuse to read and expect a one-click miracle.
Yuri Bubliy
Third-party applications prevent the application from running. There is information about this in the manual. The link is in the post.
Yuri Bubliy
The manual is attached in this post, this is not a HYDRA bug.
Yuri Bubliy
You must have a full filled Patreon account in order to access Discord.
Atleast for my r7 5700 x it was waisting of money and time because bad support and cant even get hybrid profile in use it just crash in games i try all
Does anyone know if there's anything I can do with a 5800x3d to squeeze a bit more out of it? Preferably using less power since the vcache hates too much
idk if it was hydra but it crashed my desktop had to do hard reset
Shane Allen
Correct. You can have the different versions installed simultaneously, if you wish, just unzip into different folders. That way you can keep a previous version that was working well.
Hey. After successful diagnostic of my 5700x, PBO2 profile creation and restart hydra stoped working. Logger says System.AggregateException: One or more errors occurred. ---> System.ApplicationException: Unable to start service at A.??.?(IntPtr ?) at A.??.?(String ?, String ?, String ?) at A.??.?(Byte[] ?, Int32 ?) at A.??.?(?? ?, UInt32 ?, UInt32 ?, UInt32 , UInt32& ?, UInt32& ?) at A.??.?(Byte ?, Byte ?, Byte ?, Byte , UInt32 ?) at A.??.?() at A.??.?(String ?, UInt32 ?, Boolean ?, UInt32 , UInt32& ?, Boolean ?) at A.??.?() at A.??.??() at System.Threading.Tasks.Task.Execute() --- End of inner exception stack trace --- at System.Threading.Tasks.Task.ThrowIfExceptional(Boolean includeTaskCanceledExceptions) at System.Threading.Tasks.Task.Wait(Int32 millisecondsTimeout, CancellationToken cancellationToken) at A.??..ctor() ---> (Inner Exception #0) System.ApplicationException: Unable to start service at A.??.?(IntPtr ?) at A.??.?(String ?, String ?, String ?) at A.??.?(Byte[] ?, Int32 ?) at A.??.?(?? ?, UInt32 ?, UInt32 ?, UInt32 , UInt32& ?, UInt32& ?) at A.??.?(Byte ?, Byte ?, Byte ?, Byte , UInt32 ?) at A.??.?() at A.??.?(String ?, UInt32 ?, Boolean ?, UInt32 , UInt32& ?, Boolean ?) at A.??.?() at A.??.??() at System.Threading.Tasks.Task.Execute()<---
I think he missed setting role in new discounted plan. I Sent DM to him.
I got the discounted patreon sub. In the manual to version 1.2D says i need to Disabled (Auto) the Curve Optimizer but not in the link from google.docs . Also i dont get these presets in hybrid oc (undervolted, etc.) or do i need the perform a diagnostic before?
You joined discounted 10$ plan? Me also getting problem.
How can i join the discord? If i click on connect it connects but nothings happens.
Sakaana303
Try to start Hydra with Administrator Rights if you haven`t yet
I am not sure why, but this version does not detect my CPU correctly everytime and it needs a few restarts until it finds it, otherwise stays as ---- and nothing happens. Is this only for me?
Daniel Robaina Cazorla
hello! awesome work yuri. Ive got a question, is there anyway to only use the GAME profile? is the one im interested in. Thanks a lot and stay safe!!
The RMP tweak options are awesome!
When i try set gybrid oc profile it writes core 5 unstable ryzen 7 5700x
i have the same message
How can I update from 1.2G to 1.2H? Just replace files?
When attempting to start 'Phoenix', the log repeatedly displays the message "Adapter: 1(7) - it is impossible to obtain monitoring data!". I am using an AMD Ryzen 7 7700X, purchased in October 2022.
I posted a screenshot of the error I get in discord when I try to access rmp profiles. Also when I look in the "rmp" folder I do not see them listed and the other cards that have folders there did not include 6600xt or 6650xt. This is on a freshly extracted 1.2H download from this page.
Yuri Bubliy
You have a specific processor that has one of the CCDs turned off. At the moment there is no support for such devices.
Yuri Bubliy
AMD RADEON RX 6600 XT - 130W AMD RADEON RX 6600 XT - 100W and AMD RADEON RX 6650 XT - 160W AMD RADEON RX 6650 XT - 135W 2 profiles are available to users at the moment
I found this in the log as well: ***HYDRA 1.2H PRO by 1usmus*** 12/01/2022 02:21:53 Founded CO values and HYBRID OC operation requires calibration for Zen 4. Stay tuned for updates! AMD Ryzen 5 7600X 6-Core Processor Stepping 2 GIGABYTE B650E AORUS MASTER BIOS F3c SMU 84.79.201 TABLE ver.5505028 DRAM speed 5600 MHz Non-standard configuration, 2 CCD's detected! Active CCD: #1 FillSlidersCO System.IndexOutOfRangeException: Index was outside the bounds of the array. at A.??.?()
You forgot the RMP profile for the 6650XT and 6600XT
Christian Mougogiannis
I am downloading it to try it on my 7950x now.
Trying to get it to do Diagnostics on my Ryzen 5 7600x, it begins, says it's restarting and restarts but after restarting the program doesn't open again. When I manually open it's like nothing happened at all. Tried setting the app to auto-load but that doesn't seem to be working for some reason either, I toggle it on and then restart and it doesn't start up. Any suggestions from anyone?
Has anyone managed to get DIAGNOSTIC working for Zen 4 (7950x)? Creating a basic configuration file for settings... Creating a basic configuration file for CPU profiles... AMD Ryzen 9 7950X 16-Core Processor Stepping 2 MSI MPG X670E CARBON WIFI (MS-7D70) BIOS 1.20 SMU 84.79.00 TABLE ver.5505028 DRAM speed 6000 MHz Windows 11 Pro It instantly crashes for me: ************** Exception Text ************** System.IndexOutOfRangeException: Index was outside the bounds of the array. at A. ?.?(Int32 , Int32 ?, Boolean ?) at A. ?.??.MoveNext() --- End of stack trace from previous location where exception was thrown --- at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw() at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task) at A. ?. .MoveNext() --- End of stack trace from previous location where exception was thrown --- at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
Christian Mougogiannis
Great work, did I understand the notes right and this works on Zen 4 (7950x)?
iNerd
Yuri this is huge! Thank you! i‘m very happy how last version works but now with calculator within hydra, i cannot wait to test this today evening! Huge update. Take care mate!
Roy Berry
is there going to be a point where Hydra is Feature Complete for say Zen 3? It seems the major rework for some of the underlying Hydra (there has been a few mentions of this type of thing) is being delayed because of "feature creep" add GPUs add RAM add Zen 4 maybe I missed the update where the major reworks happened - and I am still (obviously) a supporter, but with the limited time that Yuri has to work on it, I think the base application should get more polish. EDIT: please consider this constructive criticism. I'm just asking questions.
shehab edden AFY
Great work, does it support 6900xt?
F
thanks again for the update and stay safe :)
