Graphically Challenged posts
Posts: 50
Files: 127
KTC G27P6 Calibration & ICC
Below I have included the link to access calibration settings.............Link: https://drive.google.com/drive/folders/1-QLYPB4lmNyLxHC-p33TbYznCRGcY4-3?usp=drive_link
M32P10 Calibration & ICC Profile
Below I have included the link to access calibration settings.............Link: https://drive.google.com/drive/folders/1S4Kwaxgbfh-cUBK7fQbmBDD_z7oPwl36?usp=drive_link
Dough Spectrum One Glossy Calibration
Below is a link to the calibration Files...Link: https://drive.google.com/drive/folders/1Fe5p37yR5y76JZGSD3GmuJfvTUTbMLod?usp=drive_link
Corsair XENEON 27QHD240 Calibration Settings
Below I have included the link to access calibration settings.............Link: https://drive.google.com/drive/folders/1lw2kvIgxP5_0tkiqGMJY1LZKXMygeC47?usp=drive_link
KTC M27P20P Calibration Settings
Check master calibration folder for settings: https://drive.google.com/drive/folders/1SwUjVU2ZSBroppqh5T-J_aNIMrclSIn3?usp=drive_link
CALIBRATION SETTINGS MASTER FILE LINK
Hey everyone! I have gone through the painstaking effort of reorganizing, correcting, and collecting all of my calibrations into one place so my supporters can more easily find the settings they are looking for. Additionally I want to mention that while I did try to correct any errors on older calibrations, keep in mind any calibrations I have listed that DO NOT have any Calman Ultimate screenshots attached may not be as accurate as those who do, as it is likely those calibrations were done with DisplayCal and at that time I did not have a spec...
HUGE UPDATE
1. I have reorganized and tried to correct any errors in all my calibrations, though older stuff won't be as accurate as my latest reviews since I did not have the ability to create corrections.2. Upon reviewing all my previous calibrations I have found a small number of settings and ICC profiles I posted that although were still likely better than the out of the box experience, had too many errors and needed to be deleted from a long time ago. If you joined the Patreon specifically for these and you are unhappy with the results please mess...
INNOCN 13A1F Calibration & ICC Profile
1. Set Brightness to 100%2. Set Color to CustomRed: 49Green: 48Blue: 503. Disable HDR4. Make Sure 10bit Color is Enabled in the Nvidia Control Panel under "Change resolution"5. Set Dynamic Range to Full.6. Install ICC Profile
Corsair Xeneon Flex Calibration & ICC Profile
These are the new calibration settings to get accurate color at the D65 white point in HDR in DCI-P3 and SDR using a spectrophotometer, colorimeter, Calman Ultimate, and a pattern generator for the best accuracy possible.HDR CalibrationWITH HDR & AUTO HDR ENABLED IN WINDOWS!!!1. Set 12bit RGB Full in Nvidia or AMD Control Panel.SDR Calibration1. Go to Settings, Picture, Preset: StandardBrightness: 100Contrast: 50Sharpness: 52. Go to Color Temperature (Note panel variance means 100% accuracy between all panels may not be possible, but in my test...
42" LG C3 Calibration & ICC Profile
These are the new calibration settings to get accurate color at the D65 white point in HDR in DCI-P3 and SDR using a spectrophotometer, colorimeter, Calman Ultimate, and a pattern generator for the best accuracy possible.Note: THIS IS FOR GAME MODE ONLY!!!HDR CalibrationWITH HDR & AUTO HDR ENABLED IN WINDOWS!!!1. Go to Settings & Set Picture Mode: Game Optimizer2. Go to Advanced Settings, Picture,BrightnessOLED Pixel Brightness: 100Adjust Contrast: 93Black Level: 48Auto Dynamic Contrast: OffDynamic Tone Mapping: HGIGExpression Enhancer: Off3. N...
Samsung OLED G9 Calibration & ICC Profile
These are calibration settings to get accurate color at the D65 white point in HDR in DCI-P3 using a spectrophotometer, colorimeter, Calman Ultimate, and a pattern generator for the best accuracy possible.Note: THIS IS FOR GAME MODE ONLY & YOU MUST HAVE THE HDMI PORT SET TO PC MODE!!!HDR CalibrationWITH HDR & AUTO HDR ENABLED IN WINDOWS!!!1. Go to Connection, Game Mode Settings (Turn Game Mode On), Game Picture Expert, HDR10+ GAMING: Basic & Game HDR: Basic2. Go to Picture, Expert Settings, Color, & setBrightness: 50Contrast: 50Sharpness: 10Col...
INNOCN 15A1F Calibration Settings
1. Set Brightness to 100%2. Set Color to 6500K3. Disable HDR4. Make Sure 10bit Color is Enabled in the Nvidia Control Panel under "Change resolution"5. Set Dynamic Range to Full.6. Install ICC Profile
INNOCN 27G1S sRGB Accurate Color
SettingsRed: 50Green: 49Blue: 44
BEST S95B WIDE GAMUT Calibration Settings
These are the new calibration settings to get accurate color at the D65 white point in HDR in the BT.2020 WIDE GAMUT using a spectrophotometer, colorimeter, Calman Ultimate, and a pattern generator for the best accuracy possible.Note: THIS IS FOR GAME MODE ONLY & YOU MUST HAVE THE HDMI PORT SET TO PC MODE!!! (Additionally note 100% accuracy is impossible on the S95B because of Dynamic Tone Mapping, though further adjustments to contrast may help).HDR CalibrationWITH HDR & AUTO HDR ENABLED IN WINDOWS!!!1. Go to Connection, Game Mode Settings (Tu...
BEST S95C BT.2020 WIDE GAMUT Calibration Settings
These are the new calibration settings to get accurate color at the D65 white point in HDR in the BT.2020 WIDE GAMUT and SDR using a spectrophotometer, colorimeter, Calman Ultimate, and a pattern generator for the best accuracy possible.Note: THIS IS FOR GAME MODE ONLY & YOU MUST HAVE THE HDMI PORT SET TO PC MODE!!!HDR CalibrationWITH HDR & AUTO HDR ENABLED IN WINDOWS!!!1. Go to Connection, Game Mode Settings (Turn Game Mode On), Game Picture Expert, HDR10+ GAMING: Basic & Game HDR: Basic2. Go to Picture, Expert Settings, Color, & setBrightness...
S95C Updated HDR & sRGB Calibration
These are the new calibration settings to get accurate color at the D65 white point in HDR and SDR using a spectrophotometer, colorimeter, Calman Ultimate, and a pattern generator for the best accuracy possible. Note: THIS IS FOR GAME MODE ONLY!!!HDR CalibrationWITH HDR & AUTO HDR ENABLED IN WINDOWS!!!1. Go to Connection, Game Mode Settings (Turn Game Mode On), Game Picture Expert, HDR10+ GAMING: Basic & Game HDR: Basic2. Go to Picture, Expert Settings, Color, & set Brightness: 50, Contrast: 50, Color: 18, Contrast Enhancer: Off, (HDR Tone Mapp...
INNOCN 27G1S Calibration & ICC Profile
This will color calibrate the 27G1S to the D65 white point for more accurate colors.1. Go to Professional, C.T settings, User C.T1, & press On.2. Set R: 50, G: 49, B:443. Install ICC profile below.
ARZOPA 144Hz Calibration
Settings1. HDR OFF2. R: 49, G: 49, B: 483. Install ICC Profile
ASUS 240Hz SDR ICC Profile
Can't calibrate in HDR as of now, so this is the only thing worth doing until firmware updates.
INNOCN 27M2V Calibration
WITH HDR & AUTO HDR ENABLED IN WINDOWS!!!1. Enable HDR Standard on the monitor2. Set Windows SDR Content Brightness to 100%.3. Make Sure 10bit Color is Enabled in the Nvidia Control Panel under "Change resolution"4. Set Dynamic Range to Full.WITH HDR DISABLED1. Go to Professional, User C.T1 On, and Change R: 48, G: 45, B: 442. Make Sure 10bit Color is Enabled in the Nvidia Control Panel under "Change resolution"3. Set Dynamic Range to Full.4. Install SDR ICC Accurate Profile
S95B Brightness Hack & Calibration
WARNING; I DO NOT RECOMMEND MAKING ANY CHANGES TO THE SERVICE MENU, FIRMWARE, OR SOFTWARE AS THIS MAY HARM YOUR DISPLAY AND VOID YOUR WARRANTY!!!!!THIS IS SIMPLY AN EXPLANATION OF WHAT I DID FOR EDUCATIONAL PURPOSES ONLY AND I WILL NOT BE HELD RESPONSIBLE FOR ANY CHANGES YOU MAKE OR DAMAGE THAT MAY OCCUR.PLEASE DO NOT ENTER OR CHANGE ANY SETTINGS IN YOUR SERVICE MENU!!!PART 1 - BRIGHTNESS HACK1. Connect phone with smart things app2. Bring up number pad and type Mute, 119, Ok3. When menu pops up type 12344. Scroll down to Advanced and hold volum...
INNOCN 13K1F Color Calibration
This will calibrate the display to a color temperature of 6500K with a Delta E of 0.8 in SDR.1. Go to Menu and set brightness to 100.2. Click on 6500K, select User, and change the RGB values to R: 50, G: 46, B:49.3. Make Sure 10bit Color is Enabled in the Nvidia Control Panel under "Change resolution".4. Set Dynamic Range to Full.5. Install ICC Profile.
Pixio PXC348C Calibration
Pixio PXC348C CalibrationWITH HDR DISABLED IN WINDOWS1. Under Display set Brightness: 100, Contrast: 50, and Preset: User2. Go to Color, Color Temperature, and change R: 49, G: 44, and B: 453. Enable VRR.4. Install ICC profile
Samsung QN90C Color Calibration
This will calibrate the display to a color temperature of 6500K with a Delta E of 0.0 in SDR and greatly improve HDR accuracy.WITH HDR DISABLED IN WINDOWS1. Go to Picture, Expert Settings, and set Brightness: 50, Contrast: 50, Color: 25, Local dimming high, contrast enhancer high, color tone, warm, gamma 2.22. Under White Balance (2 point), set R-Gain: 1, G-Gain: 4, & B-Gain: -11.3. Under Color Space Settings Set Color Space: Custom & Color Gamut: DCI-P3 with Red, Green, and Blue set to 50.4. Make Sure 10bit Color is Enabled in the Nvidia Contr...
INNOCN 32M2V 32” Mini LED Calibration
This will calibrate the display to a color temperature of 6500K in SDR. It will also color balance the display so you can accurately edit photos and videos in HDR or SDR at 144Hz.HDR CALIBRATION!!!1. Set Windows SDR Content Brightness to 100%.2. Make Sure 10bit Color is Enabled in the Nvidia Control Panel under "Change resolution"..3. Set Dynamic Range to Full.4. Install HDR ICC ProfileSDR CALIBRATION!!!1. In settings go to "Professional" and select C.T settings2. Select User C.T13. Set R: 51, G: 49, B:514. Install SDR ICC Profi...
Jlink 27" 1440p 165Hz Color Correction & ICC Profile
My ability to correct this display was limited, but these settings and ICC profile will help.1. Under Color in the settings set temperature to warm.2. Install ICC profile below.
Samsung G85SB QD OLED Calibration Settings & ICC Profile
This will calibrate the display to a color temperature of 6500K. It will also color balance the display so you can accurately edit photos and videos in HDR at 175Hz.WITH HDR & AUTO HDR ENABLED IN WINDOWS!!!1. Go to Picture, Expert Settings, Color, & set Brightness: 50, Contrast: 50, Color: 25, Contrast Enhancer: Off, Color Tone: Standard, & Peak Brightness: High.2. Under White Balance Set R-Gain: 13, G-Gain: -17, & B-Gain: 0.3. Under Color Space Settings Set Color Space: Custom & Color Gamut: DCI-P3 with Red, Green, and Blue set to 50.4. Set Wi...
Jlink 34” 165Hz Color Correction & ICC Profile
This will calibrate the display to a color temperature of around 6900K. It will also color balance the display so you can accurately edit photos and videos in SDR at 144Hz-165Hz.WITH HDR DISABLED IN WINDOWS!!!1. Go to Settings and under Display set Brightness to 100.2. Under Color set it to Warm & Saturation to 56.3. Under Gaming Setup set Gsync to On, Overdrive to Low, and Low Input Lag to On.4. to enable 165Hz go to Advanced Settings and set it to 165Hz under Over Clock. Warning this may cause flickering with Gsync enabled.
S95B 144Hz G-sync Fix!!!
WARNING TRY AT YOUR OWN RISK!!! Instructions to get Gsync working at 144Hz:https://www.reddit.com/r/OLED_Gaming/comments/uq6s37/how_to_fully_unlocked_4k_144hz_10bit_for_pc/It worked for me, but you must have Gsync enabled first, and if your display no longer works reset your CRU and reinstall your Nvidia drivers.
Samsung S95B Color Calibration, 144Hz Overclock, & Brightness Boost
This will calibrate the display to a color temperature of around 6500K. It will also color balance the display so you can accurately edit photos and videos in HDR at 144Hz.WITH HDR & AUTO HDR ENABLED IN WINDOWS!!!1. Go to Picture, Expert Settings, Color, & set Brightness: 50, Contrast: 50, Color: 25, Contrast Enhancer: High, Color Tone Warm 2, & Peak Brightness: High.2. Under White Balance Set R-Gain: 9, G-Gain: 0, & B-Gain: 1.3. Under Color Space Settings Set Color Space: Custom & Color Gamut: DCI-P3.4. Set Windows SDR Content Brightness to 5%...
