Leakoo
mogy64 from patreon

mogy64

patreon

mogy64 posts

Posts: 581 Files: 1331
mogy64 post Commission from patreon

Commission

Another one! Hopefully within the next couple of days you'll see another one, I feel energized now : )Partial timelapse will be available! Towards the end my hard drive started failing, and power outages cut out the recordings short.....

mogy64 post Furmi from patreon

Furmi

Commission! Aiming for 3-4 more to be done this month...Full resolution and timelapse will be available for Tier 2 and up!

Business Card Process

Yumi had suggested the idea of making a new business card mimicking the layout of Instagram, making it look like a "post" with a fitting picture, something that would make you think yeah it's something that was taken while Krea was out with someone. I liked it so that's how things started!Out of the 3 initial sketches, there very obviously was a winner lol, the only one that went past the rough draft phase. Pretty straightforward from here on, refine the sketch and print it out to ink.Digital clean sketchInking with light pad.In...

Taifau Cafe Cover Process

As stated in the other post, I did already have a finished cover picture! But honestly I wasn't happy with it when I first made it, and much less now... I was rushed to get it to print and in the end it wasn't even used! Oh well.I still liked some of the other sketches. Ideally the one with only Ram and Milo would be the ideal choice as they are the main focus of this chapter, but this is a product to be sold, you guys don't sell sorry!!! Krea has to pick up your slack.... At least Ram has more presence compared to the original cove...

Plush Interest Check

Hi... yes another plush may be in the way! lolThis time some company reached out to me to make one alongside them. Normally I would just decline or ignore proposals like this, but since I've had my hands tied in terms of production and shipping due to tariffs and own local issues, I figured it would be the best compromise to be able to make something new without too much logistical problems at the time being.Compared to previous plushies where I could have some wiggle room on the amount of orders needed to fund it, this time it has to be 50...

mogy64 post Future Usalia from patreon

Future Usalia

Commission! From now on R18 work will be fully displayed here although at a smaller resolution, full sizes and any extras like timelapses will still be on the reward packs!You can already find this one in October's pack, timelapse is being rendered right now, so in an hour or so you will find it there as well. Thanks for your support!

mogy64 post October Reward Packs (Available until November 30th) from patreon

October Reward Packs (Available until November 30th)

Here's this month's rewards! Check your messages to get the link. If you join after today, send me a message to receive it!R18 rewards are still in the works I'm aiming to be done tomorrow sorry for the delay...Thanks for your support!

mogy64 post Confuror Recap from patreon

Confuror Recap

Unlike the first trip, this time I will just write about it. I don't really want to doodle about it lol..... It wasn't very eventful and a bit tiring in other ways!! I only have plush pictures to share, as well as many things I doodled on people's conbooks signing section. Everything you see above is that.Day 0 was very uneventful since well, sales don't start until Friday, Thursday was just to pick stuff up and set up our table. 7-11 in my city doesn't have onigiris, but the ones in Guadalajara do, so I decided to give them...

mogy64 post Commission from patreon

Commission

Felicia cosplay for Halloween, timelapse will be available for Tier 2 onwards!

Shop Updates+Taifau Cafe Physical Copies

Good and bad updates! Let's start with the bad:The Cannelle & Claire desk mat, alongside the Krea mousepads have been delayed. Despite having imported merchandise many times throughout the years, customs decided to be a pain in the ass, not allowing the package to get to me, thus it will be disposed of. It was a huge waste of time and money, and I am sorry for the unfortunate circumstances, you will be getting your preorders however, which leads me to the next point.Pre orders for a few items are open! The situation in Mexico hasn't cha...

mogy64 post Krea from patreon

Krea

Art for a new business card. After doing the cover as a mix of watercolor and alcohol markers, I finally felt confident enough to do a piece with markers only, to pleasantly surprising results! I am happy with it, I will try to use them more often.This is more or less the last thing I have to do for con prep, so ideally now I'm going back to commissions, thanks for your patience 🙇Scans will be available for Tier 2 onwards, there will also be a write up about the process, I took a few pics so it should be enough to share!

mogy64 post Stickers from patreon

Stickers

All the new sticker designs, this time I didn't try to go overboard with new merch, just enough new stuff for people who are going to my table again. The main point is to get rid of all the leftovers I have after all lol.Yumi and I had an idea of putting 3 of our girls in a group, they're the Cherry Devils : ) Maybe you'll find out why someday.Mora and Celine did get sold out ever since they were first printed, so I decided to update them. Mora realistically just got a haircut lol.... while Celine got some adjustments that Yumi had ...

mogy64 post Commission from patreon

Commission

VGen request : ) I'll try to use that site more...Full res for Tier 2 and up!

mogy64 post Taifau Cafe print version?????? from patreon

Taifau Cafe print version??????

After like 2 years of trying to, I'm finally getting this printed!!! So I needed a cover, I had done one a few years ago but I don't like it anymore lol, and I'm already very short on time as is, (have to send the files to the printer by Monday lol) so I decided to do it on paper, which was faster! But I wasn't completely satisfied with it either so I painted with it a bit.... which ended up being a nice combination! I like it. I will write a post about the process sometime later.The plans are to sell this at Confuror and to Sti...

What do you want to see more of?

Pretty self explanatory question! With my likely increasing lack of time (more info here if you missed it), I would like to be slightly more focused in regards to any personal work I am able to do. Commissions will keep being priority obviously.But yeah anything goes, if you want to see more of certain characters, more R18 work, comics, more text/blog posts if you actually enjoy those lol, even more fanart of specific things, but don't count on that one too much lol.. Point is anything goes.Comics and full illustrations are time consuming, ...

mogy64 post September Rewards (Available until October 31st) from patreon

September Rewards (Available until October 31st)

Here's this month's rewards! Check your messages to get the link. If you join after today, send me a message to receive it!Finally things are starting to get a bit more livelier here! I hope lol...Thanks for your support!

mogy64 post Detective Set from patreon

Detective Set

Shirts and charm designs that Yumi and I made, the shirts were drawn by her while I handled the charms. Krea is still a WIP but Jack is finalized!To be sold at Confuror! Online sales are still up in the air....

mogy64 post Tux from patreon

Tux

Commission, R18 version and Timelapse available for Tier 3 onwards!

mogy64 post Krea (old) from patreon

Krea (old)

Commission! A very overdue one.. Old Krea's more or less yearly appearance. December last year I was in Mexico City before visiting Japan, and I got to see a couple of museums. Prehispanic culture is very interesting to me in both history and aesthetics, the snake thing from Taifau Cafe is very obviously influenced by Quetzalcoatl, so when I got the request for this drawing I wanted to do something very directly inspired by what I saw, which turned out to be a challenge!Originally I wanted a much bolder direction with contrasting reds and b...

mogy64 post Pokemon stuff from patreon

Pokemon stuff

Braixen will be the very last addition to the charms I have been making! I may go back to making more but it wont be any time soon at all lol. I also updated the Delphox mousepad from last year, I intended to print it but once again its getting shelved, maybe once the whole tariff situation gets resolved it will get its time to shine.

Shop News/Desk Mat Preorders

Pre orders for the desk mats will go live today at 8PM PST. Only 4 will be available for the time being. If you miss out don't worry, once the tariff and shipping situation gets resolved I will reopen orders for any items items that haven't been on sale yet.If you are from the USA please read below on how things will be handled, if you live anywhere else youre good to go! But wouldnt hurt to read regardless, its the same information that will be in the Ko-Fi listing.The Mexican Post Office still has shipments to the USA suspended as of ...

mogy64 post Cannele & Claire from patreon

Cannele & Claire

A deskmat to be sold at Confuror next month wow!!!!! Given the current tariff situation, I am not able to ship to the USA at the moment, making taking orders for these quite difficult... but for those who are willing to wait I will be putting up 2-3 for sale in the following days. First come first serve lol....

Life Update lol!!!

Hi everyone! This is something I have been meaning to write for... a few months now lol, but the uncertainty of how things would go had me doubtful on whether I should say anything or not, but things seem to be getting brighter so finally some explanation of how things are going on my end!First of all, I think it has been noticeable that my output has greatly decreased this year, something that I do feel super sorry about and I'm trying my best to go back to my usual pace. Endless thanks to the people who have been patient with me in regard...

mogy64 post Krea Mousepad from patreon

Krea Mousepad

It took me waaaay too long to get this done, I just was not happy in the slightest with how it was coming, it got redrawn at least like 4 times... Her face in particular can be pretty hard to get "right", so it was a big problem. Her proportions end to be on the exaggerated side, so I had to tone her down to be a bit more normal too, the balancing act was also a problem.But it's finally done and I'm satisfied with it lol.... mousepad is something I'd use and look at everyday, so I was even more picky than usual on getting it...

Sticker Club/Shop Update

AS of August 27th Mexico has suspended any shipments to the USA for the time being due to the ongoing tariff situation, as you can guess the release of the sticker sheets will be pushed back again.... Unfortunately there's nothing that can be done besides waiting until the situation gets resolved, ideally sooner than later. Rates from private couriers like DHL, UPS, FedEx etc. are way too out of budget, with simple small things costing up to $50 USD at the very least...Despite this things will resume as normal in terms of the Sticker Club, ...

mogy64 post August Rewards (Available until September 30th) from patreon

August Rewards (Available until September 30th)

Here's this month's rewards! Check your messages to get the link. If you join after today, send me a message to receive it!Thanks for your support!

mogy64 post Anniversary from patreon

Anniversary

The 28th was Yumi and I's anniversary. We are long distance at the moment, but been working hard to make sure that won't be the case for much longer, still wanted to do something to celebrate it!Scan will be available for Tier 2 onwards.

mogy64 post Rita from patreon

Rita

Commission, the only summer drawing this year I think...Timelapse and alt version available for Tier 2 onwards.

mogy64 post Penelope from patreon

Penelope

Commission! Timelapse and R18 version available for Tier 3 onwards

mogy64 post Krea & Jack from patreon

Krea & Jack

The 23rd is their "anniversary" lol of when Yumi and I decided that they would be a couple. They do mean a lot to me so I wanted to draw a pic for it, same reason for the Sticker Club release!Full res available for Tier 2 onwards

More Models